Ender 3 V3 SE Extruder Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An aesthetic top cover for the extruder motor
- Rating
- 0 / 5
- Likes
- 72
- Downloads
- 259
- Makes
- 0
- Views
- 2,015
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Public Domain
A cover I made using the open source SE Reference model. Couldn't find a cover so I made it. Its a nice and snug fit.
You'll need 1x M3x5mm screw for the right side (you can reuse the z sensor screw for the left side) or not, it wont fly off if you just screw in the left side.
Due to the thickness, you might need to install a nut or washer the bottom z sensor screw (in picture) to make it straight.
There's a 1-2mm gap between the top of the motor and the cover (couldn't be bothered fixing that but leaves space to vent some air I guess.
Print in PETG or with higher temp material, the moter gets very hot.
Enjoy.