Ender 3 V3 SE Extruder Cover
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
An aesthetic top cover for the extruder motor
- Ocena
- 0 / 5
- Polubienia
- 71
- Pobrania
- 257
- Wydruki
- 0
- Wyświetlenia
- 1996
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Creality Parts & Upgrades
- Licencja
- Creative Commons — Public Domain
A cover I made using the open source SE Reference model. Couldn't find a cover so I made it. Its a nice and snug fit.
You'll need 1x M3x5mm screw for the right side (you can reuse the z sensor screw for the left side) or not, it wont fly off if you just screw in the left side.
Due to the thickness, you might need to install a nut or washer the bottom z sensor screw (in picture) to make it straight.
There's a 1-2mm gap between the top of the motor and the cover (couldn't be bothered fixing that but leaves space to vent some air I guess.
Print in PETG or with higher temp material, the moter gets very hot.
Enjoy.