1 / 2
E3NG - BTT Kraken Mount + Cooling
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Made a BTT Kraken mount for the E3NG v1.2, uses a 4020 radial fan for cooling
- Rating
- 5 / 5
- Likes
- 17
- Downloads
- 117
- Makes
- 1
- Views
- 503
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Tested! However, the version here is beefed up a little to add strength.
Uses three “electronics_DIN_rail_generic_mount.stl”, as for screw lengths: use whatever reaches the heat set inserts!
(Remember that the Kraken is upside down when you wire it up, especially fan voltage selection)