200mm Lazy Susan
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Lazy Susan (turntable) for serving. 200mm diameter x 20mm high
- Rating
- 0 / 5
- Likes
- 8
- Downloads
- 26
- Makes
- 0
- Views
- 359
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Kitchen
- License
- Creative Commons — Attribution
Based on my basic thrust ball bearing design, I increased the outer diameter to 200mm, added a top plate with ribs for support, and added hidden clips to secure the top and bottom pieces while still spinning freely!
This comes in 3 pieces: top, bottom, and ball cage. Both top and bottom are printed with the raceway facing up for the smoothest possible raceway and to avoid support material. The ball cage keeps the balls evenly spaced and requires fewer balls.
To assemble, place top face down, cover with the ball cage, add a 6mm Airsoft BB in each ball cage hole, and gently press bottom down over balls until all six clips are engaged. Once the bottom is fully seated, it will spin without falling apart.
Designed with onshape.com, and free to view or copy! If you remix my design for a future project, please link back to this page!
material PLA
print settings: 0.10mm DETAIL
infill = 25% gyroid
seam position = random
enable ironing, topmost surface only
bed temp = 70C