1 / 3
Creality K1C Exhaust Slim Fan Duct — image 1
1 / 3

Creality K1C Exhaust Slim Fan Duct

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of fan duct for the Creality K1C to make a 90º angle right from the exhaust, continuing with a rectangular duct.

Rating
5 / 5
Likes
76
Downloads
448
Makes
2
Views
1,819
Reviews
1

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

The original model required quite a bit of room behind the printer to connect a ventilation hose.

In this model I've added a 90º angle, to direct the air up, which now only requires about 6cm (~2 inches) of space behind the machine, allowing it to be installed close to a wall. With additional ducts the air can be directed as high up as you want, and can optionally be coupled to a ventilation hose.

I've added various sizes of the ducts and connectors, and will see if I can clean up and add the parameterized Fusion file as well.

  • Easy installation – attaches directly to the K1C’s exhaust fan
  • Improved air management – helps reduce fumes and heat buildup
  • The print in the picture is printed in PLA, but it's probably best printed in PETG, ABS, or ASA to withstand the printer's operating conditions

The model files are already correctly oriented for printing. Some require supports, which aren't yet enabled in the 3mf files. For the exhaust adapter organic supports are recommended. The hose adapter only needs support painted on for the rim on the hose end.

TODO

  • Optimize exhaust adapter for airflow
  • Add variant for rectangular duct to match with industry standards, e.g. 110x55mm
     

Tags