Holder / Mount for WiFi Surveillance Camera within Enclosure (73mm base)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A Mount for WiFi Surveillance Camera within Enclosure with a round 73mm diameter base.
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 11
- Makes
- 0
- Views
- 121
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Share Alike
A mount for a standard (Wi-Fi) surveillance camera with a 73mm diameter base and rotating camera head.
A cutout in the frame allows for the connection of the power cable to the camera base.
You can attach the mount directly to the inner corner of the enclosure, where a screw hole is provided in the frame.
For assembly, you will also need:
1x M3x8 screw (I chose a black screw for aesthetic reasons).
1x M3nS nut.
Insert the M3nS nut from below into the slot. Ensure that the nut is properly seated before installation.
Position the mount inside the enclosure in a corner and secure it from the outside with the screw.
The .stl file is provided to enable customization of the dimensions if required