Case for Swimming goggles
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€4.81 – €5.87 net (excluding VAT)
For file: Horni_0.4n_0.2mm_PLA_MINI_5h9m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €5.34 excluding VAT (range midpoint).
- Weight reported by the author
- 71 g
- Print time reported by the author
- 5.14 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
A 3D-printed case for swimming goggles with ventilated hexagonal perforation.
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 72
- Makes
- 0
- Views
- 630
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution
This is a 3D-printed protective case designed for swimming goggles. The case features two hinges, secured with M3x16 mm hex socket screws and M3 square nuts. One side of the case is perforated with a hexagonal pattern for ventilation.
The closure system uses four strong 6x3 mm magnets, ensuring a firm and secure closure. This case provides excellent protection for your goggles, keeping them safe from scratches and damage while allowing airflow for drying.
Print Settings:
- Layer height: 0.2 mm (recommended)
- Infill: 15-25% (for durability)
- Supports: Not needed
- Material: PLA, PETG, ASA (for better durability)
- Wall count: At least 3 perimeters
- Bed adhesion: Not needed brim or skirt
- Assembly: Requires two M3x16 mm hex socket screws, two M3 square nuts, and four 6x3 mm magnets and some super glue for securing magnets.