1 / 4
CLICKbase Spacers - parametric Fusion360
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This is a simple spacer that can be printed to the exact measurements of the space left after you fill it with the base grid.
1 - open the file in fusion 360
2 - goto modify→change parameters & update the clickbase_spacer_width to the desired width
3 - Optional : If you dont use the standard width grid/bins you can update the clickbase_unit_length to your liking as well
4 - Right click on any of the components - 1x, 2x, 3x, 4x, 5x, 6x. 7x. 8x and export as STL
5 - Import the STL to your slicer and print.
NOTE: I am adding a 2u sample that is 12mm wide as an example STL.