500w Daedalus TwoTrees Vacuum Mount Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Moving from the supplied 80w to 500w spindle, the hole spacing was different, so I made this handy adapter.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 20
- Makes
- 0
- Views
- 213
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
500w vacuum adapter for Daedalus spindle. The vacuum that can be purchased for the TTC450 CNC machine is a must. Link below for the spindle upgrade I used, TwoTrees sells their own, but I already had this spindle. You will also need the adapter plate found on Printables to mount the 500w spindle if using an aftermarket one like I did.
Spindle: https://www.amazon.com/dp/B083VRT6Y3?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1
TwoTrees TTC450 Pro: https://www.twotrees3dofficial.com/products/two-trees-ttc-450-pro-cnc-router-machine
500w Adapter Plate: https://www.printables.com/model/807690-motor-adapter-for-cnc-milling-machine-ttc450
You will need the following minimum hardware (also pictured):
3pc of M4x12mm panhead screws
2pc of M4x16mm panhead screws
3-4pc M4x6mm L heat inserts (the holes in the model could be a little bigger)
Screws in this kit:
https://www.amazon.com/dp/B0DQDH7KLQ?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1
Printed with:
0.4mm nozzle, 2mm height, 30% infill, supports on
The holes for the spindle are ever so slightly off… you can tweak the model to your hearts desire.