1 / 5
Print-in-place tube clamp, fully parametric
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick release clamp that can be used as a base for a plethora of different applications.
- Rating
- 4.625 / 5
- Likes
- 93
- Downloads
- 790
- Makes
- 6
- Views
- 2,406
- Reviews
- 8
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Modify the following variables in the file for your specific use case and printer:
ClampGap - the gap between the body of the clamp and the lever to discourage fusion of the parts (0.5mm worked for me).
PinHoleDiameter - the hole for the filament pins, adjust for your printer as necessary, but the fit should be very tight.
PipeDiameter - the diameter of the pipe to be clamped (measured size worked for me).
Tolerance - the gap between the fingers of the links, likely needs to be a multiple of the layer height.