K1 Carto Cover
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple way to add Cartographer3d to Creality K1 platform. Also solves very complicated geometry for Micro-Swiss hot end
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 36
- Makes
- 0
- Views
- 379
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to add a Cartographer3d to my K1's and Max's, but I had already made a significant commitment to Micro-Swiss hot ends/nozzles which I truly love. But they are short… real short. Short enough to make me throw away a weekend on designing space pen type mounts trying to thread the 0.5~1mm needle of available real estate in my chosen format. Finally the pencil occurred to me. Just shamelessly steal Purcell's hard work and jam my requirement into it. Voila… a Carto Cover.
BOM: 2x M3x2.5(L) x4.5mm(OD) Brass Heat Set Insert
1x DIY 4C cable (+/- 25mm)
X Offset= 15.37mm
* Widened Lidar access / Coved screw locations
** Eliminated cleats and stops for the LED rack. Extended rails side to side.
*** Added manageable carto mount shim. Adjust only the height in slicer for precise results.
(Default 1mm. Use Micro-Swiss cover file for the broadest range of “Z” adjustment)
**** Published covers for Micro-Swiss Flowtech Hot end/Nozzle configurations
To avoid a really annoying support clean-up:
*** Print Upside Down, use Manual Support. Do NOT support nozzle port (See pics) ***