1 / 2
1-Way Ratchet Screwdrivers [Print In Place] [No Supports] — image 1
1 / 2

1-Way Ratchet Screwdrivers [Print In Place] [No Supports]

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Ratchet Screwdriver Set with 12mm and 24mm hex hole options. From printbed to workbench: Print In Place + No Supports.

Rating
5 / 5
Likes
29
Downloads
115
Makes
2
Views
625
Reviews
1

Updated at source:

Model information

Category
Tools
License
Creative Commons — Attribution — Noncommercial — NoDerivatives

I've always been fond of sci-fi, that's why I find print-in-place, functional products fascinating. I wanted to tackle a new challenge, and this is the result: a set of ratchet screwdrivers that are useful, strong, and ready to go!

From the printbed to your workbench: it's a print-in-place, no-supports set of screwdrivers for fine to medium duty work, up to M5 screws, bolts and nuts. I've tested and broken three different units with fairly consistent results:

  • Max Torque (breaking point):                  7-8 Nm*
  • Min Torque (ratcheting):              0.55-0.60 Nm*

*The test prints were made on eSun PLA+, 0.4mm Nozzle, 6 Walls, 25% Infill. Results may vary depending on filament and printing profiles.

 

---------------------------------------------------------------------

Note: This is the free set of ratchet screwdrivers, with separate models for clockwise and counterclockwise use.

You can get the 2-Way Ratchet Screwdriver for only $5 here. It comes with a selector to make it work both ways. It's also print in place, no supports!

---------------------------------------------------------------------

 

Versions: 

There is an arrow and a small dent marking each variant:

  • Ratchet Screwdriver Clockwise Short (12mm hole)
  • Ratchet Screwdriver Counterclockwise Short (12mm hole)
  • Ratchet Screwdriver Clockwise Long (24mm hole)
  • Ratchet Screwdriver Counterclockwise Long (24mm hole)

 

Optional:

  • 6x2 mm magnets with some CA glue to fix the magnets in place.
  • I recommend applying some lubricant (e.g. lithium grease) through the openings on the sides to prevent the plastic from wearing off.

 

Printing:

  • Once printed, remove or break the runners (small connectors) from the bottom of the print.
     
  • This print will have to endure mechanical stress, so don't save on filament here.
    • Nozzle: 0.4 mm
    • Layer height: 0.12mm to 0.20mm
    • Walls: 6 minimums.
    • Infill: at 20% to 25%, Rectilinear.
       
  • You'll find a 2mm hole going through the body. It's not a bug, it's a feature! Its purpose is to provide a solid column of walls around this hole to strengthen the vertical axis when applying force.
     
  • Make sure your printer can do 0.2mm tolerances. I recommend you test your printer capabilities with my QuBenchy - 3D Printing Torture Test Cube:
     

 

Feedback is welcome. Cheers!

 

------------------------------------

Rendered in Blender, using Blender Boom's Desk Scene and @Az3Dip's Ender 3.

Tags