1-Way Ratchet Screwdrivers [Print In Place] [No Supports]
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Ratchet Screwdriver Set with 12mm and 24mm hex hole options. From printbed to workbench: Print In Place + No Supports.
- Ocena
- 5 / 5
- Polubienia
- 29
- Pobrania
- 115
- Wydruki
- 2
- Wyświetlenia
- 625
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Tools
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
I've always been fond of sci-fi, that's why I find print-in-place, functional products fascinating. I wanted to tackle a new challenge, and this is the result: a set of ratchet screwdrivers that are useful, strong, and ready to go!
From the printbed to your workbench: it's a print-in-place, no-supports set of screwdrivers for fine to medium duty work, up to M5 screws, bolts and nuts. I've tested and broken three different units with fairly consistent results:
- Max Torque (breaking point): 7-8 Nm*
- Min Torque (ratcheting): 0.55-0.60 Nm*
*The test prints were made on eSun PLA+, 0.4mm Nozzle, 6 Walls, 25% Infill. Results may vary depending on filament and printing profiles.
---------------------------------------------------------------------
Note: This is the free set of ratchet screwdrivers, with separate models for clockwise and counterclockwise use.
You can get the 2-Way Ratchet Screwdriver for only $5 here. It comes with a selector to make it work both ways. It's also print in place, no supports!
---------------------------------------------------------------------
Versions:
There is an arrow and a small dent marking each variant:
- Ratchet Screwdriver Clockwise Short (12mm hole)
- Ratchet Screwdriver Counterclockwise Short (12mm hole)
- Ratchet Screwdriver Clockwise Long (24mm hole)
- Ratchet Screwdriver Counterclockwise Long (24mm hole)
Optional:
- 6x2 mm magnets with some CA glue to fix the magnets in place.
- I recommend applying some lubricant (e.g. lithium grease) through the openings on the sides to prevent the plastic from wearing off.
Printing:
- Once printed, remove or break the runners (small connectors) from the bottom of the print.
- This print will have to endure mechanical stress, so don't save on filament here.
- Nozzle: 0.4 mm
- Layer height: 0.12mm to 0.20mm
- Walls: 6 minimums.
- Infill: at 20% to 25%, Rectilinear.
- You'll find a 2mm hole going through the body. It's not a bug, it's a feature! Its purpose is to provide a solid column of walls around this hole to strengthen the vertical axis when applying force.
- Make sure your printer can do 0.2mm tolerances. I recommend you test your printer capabilities with my QuBenchy - 3D Printing Torture Test Cube:

Feedback is welcome. Cheers!
------------------------------------
Rendered in Blender, using Blender Boom's Desk Scene and @Az3Dip's Ender 3.