Milwaukee Packout - 2 Drawer - Wide Divider
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
For large hand & power tool storage
- Rating
- 0 / 5
- Likes
- 19
- Downloads
- 133
- Makes
- 0
- Views
- 1,091
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial
MILWAUKEE PACKOUT - 2 DRAWER - WIDE DIVIDER
Milwaukee Packout stock drawer dividers can be limiting to say the least. Especially when it comes to storing large hand & power tools. Your options are front and back depth, a grid or NOTHING (ie. Chaos)...
Here's your solution: A divider that spans the width of the drawer. Print the Ends that slide into the drawer wall slots and connect them with the printed stretcher. A Channel is cut in each part to accept a 3/16 (5mm) piece of plywood or aluminum to create the body of the divider, giving you a very sturdy wall to protect your valuable tools in transport and keep you organized.
Assembly consists of 2 ends and 2 contoured stretcher pieces all connected with dovetail joints, as pictured.
You will need in addition to your printed parts a piece of 3/16 (5mm) plywood (pictured above) or aluminum sheet that creates the body of the divider.
Cut dimensions are: 15.1875" x 4.5" or 385 x 114 mm
All pieces should be oriented upside down in the slicer and supports will need to be enabled for stretcher prints.
HAPPY PRINTING