1 / 2
Hand-operated pump arm link
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement part for the APAC 1792PG hand-operated liquid pump for barrels.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 4
- Makes
- 0
- Views
- 33
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Mechanical Parts
- License
- Creative Commons — Public Domain
Original part broke from the Y joint that attaches to the pump body, so I created this with what I believe a more sturdy design.
It is 101mm long, 16mm thick, 11mm wide at the narrow end and 27mm wide at the wide end with a 13mm gap in the middle. The holes are 6mm diameter.
Print settings used:
- Orientation: largest flat side on the bed, like in the image
- Layer height: 0.2mm
- Support: organic on build plate only, but you could probably get away with none.
- Infill: 100%, but you could probably get away with less with gyroid pattern.
Printer:
Prusa i3 MK3S+ w/ enclosure
Filament: Prusament PETG Jet Black