Treadmill Riser
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Riser stand for attaching a desk/platform to a NordicTrack C700 treadmill.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 33
- Makes
- 0
- Views
- 356
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
This is a quick and dirty model I made just to get something functional while I come up with a better plan. It works, but can definitely be optimized. As is, it is quite sturdy. I used an old ash slab to create a platform to work on my laptop, watch movies, or read while walking on my treadmill. Only one model is included, so you'll need to mirror it in your slicer to get one for both sides. The arms it rests on have a slight taper. Platform attaches with eight #8 deck screws.
For walking it sits fine; if you plan to use it running or jogging, I'd recommend using zip ties or straps to hold it in place.
Not: Unable to fold the treadmill while the platform is in place. Revision in progress to remedy this.
I printed in Sunlu PLA+ becuase I had lots extra and it seems to be working fine. PETG would probably be better.