Parkside PKGA 14.4 A1 XTEAM 20V conversion
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
since parkside no longer makes 14.4 V batteries i made this to convert the PKGA 14.4 A1 to new battery
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 42
- Makes
- 0
- Views
- 608
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- GNU General Public License v2.0
this is a conversion kit to update the PKGA 14.4 A1 Parkside's multitook to the available 20v battery (still produced).
WARNING: YOU ARE OVER-VOLTING A DRILL, IT CAN LEAD TO PERMANENT DAMAGE TO THE TOOL AND/OR MAY CAYCH ON FIRE. I'M IN NO WAY RESPONSIBLE FOR ANY DAMAGE TO PEOPLE OR PROPERTY, DO AT YOU OWN RISK. KEEP IN MIND OVERDISCHARGING THE BATTERY
instruction:
remove any battery from the tool
Cut at this seam without damaging any internal component (may require disassembly)
- print the TopPart and slide it on as far as it will go
- using the printed part as guide drill the holes (ideally 3.2mm) to fix the part to the tool
- using 2 M3 bolts and nuts fix it to the drill
- if you havent already remove the old battery connector and slightly strip the wires
- print the BottomPart
- get some blue spade connector and remove the blue insulator
- get some 18 awg wire cut it to a desirable lenght (15-20 mm) and crimp the connectors
- then slide the free wires trough the holes in the bottomPart (i suggest color coating them)
- then slightly strip the tool's wire
- USING HEATSHRINK TUBING solder the tool's wires to the conversion kit wires
keeping in mind polarity (RED goes to + wire of bottomPart BLACK goes to - wire of BottomPart) - using 4 m3 screw (some short ones) mate the BottomPart and the TopPart
final result should look something like this:

thanks to Teddyminator for providing the base model in wich this is made from, i suggest you check it out his original design if you have 20v parkside batteries laying around