1 / 2
CORE One Purge/Trash Bin - Remix for 6x3mm magnets — image 1
1 / 2

CORE One Purge/Trash Bin - Remix for 6x3mm magnets

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Remix of CORE One Purge/Trash Bin by @nicohirsch for use with 6x3mm round magnets.

Rating
5 / 5
Likes
51
Downloads
343
Makes
18
Views
1,577
Reviews
17

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial — Share Alike

This is a remix of CORE One Purge/Trash Bin by @nicohirsch for use with 6x3mm round magnets.

There are two versions available:

  1. Holes for magnets are 3.0mm deep
  2. Holes for magnets are 3.2mm deep

They exist because the first layer squish might reduce the height of the first layer, thus effectively making the magnet holes less deep so the magnets might might not sit flush with the bottom of the part for installation. If that possibility bothers you, you have the option to print the version with 3.2mm holes which should provide enough clearance to avoid this issue.

Please like this model and post a Make of this print if you liked it and it was useful to you. Thank you!

Notice

Please note: The 3D preview of the part does not show the holes as they are inserted as negative volumes in the original flat part provided by @nicohirsh. Printables cannot render these negative volumes. The 3mf-files do contain the holes and they will be sliced correctly.

Print instructions

Recommended material: Any material that can hold up to your (planned) chamber temps of your Prusa Core ONE.

Installation & Other parts needed

Please follow the guide in the original model by @nicohirsch:
https://www.printables.com/model/1194455-core-one-purgetrash-bin

Tags