1 / 10
fidget spinner — image 1
1 / 10

fidget spinner

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

fidget spinner based on my mini split radial ball bearing, uses 6mm Airsoft BBs

Rating
0 / 5
Likes
5
Downloads
18
Makes
0
Views
151
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Similar to my "mini split radial ball bearing" but with 3 lobes and raised buttons to hold while spinning. I had planned to add a coin or washer in each lobe, but the screws and nuts were enough weight.

This is designed in 4 sections so it can be printed with the raceway of each section facing up for a smooth surface. The ball bearings are assembled between the top an bottom sections so there is no need for a hole and plug.

Assemble with six 6mm Airsoft BBs, three M3x6 socket head screws, one M3x16 socket head screw, and four M3 hex nuts. 

I have also included slim versions of the top and bottom inside sections incase anyone prefers a slimmer build. The slim version uses another M3x6 screw rather then the M3x16.

raceway diameter = 13mm
reduced outer diameter from 34mm to 22mm and added 3 lobes with screws
height = 10mm main body or 20mm with center buttons
gap = 0.5 mm

material PLA
print settings: 0.10mm DETAIL
infill = 25% gyroid
seam position = random

bed temp = 70C 

model available at: 

https://cad.onshape.com/documents/b718d4de7d8feeb899549ef8/w/1df84c3ce6695636f17401be/e/7a60ee45cccaceb06feb4444?renderMode=0&uiState=67ccf7c91c49f90a32b9c51a

 

Tags