Regulated Creality K1, K1C, K1 Max Z Carriage for T8 Oldham Coupler
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Inspired by Derrick's Oldham coupler mount but with the manually adjustable Z axis; STEPs
- Rating
- 0 / 5
- Likes
- 25
- Downloads
- 106
- Makes
- 0
- Views
- 818
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Creality Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Inspired by DerrickDarrell's Oldham coupler mount but with the manually adjustable Z axis. Based on @JEng CAD files (V2) and drawn from sketch - still in STEP files. Tolerances checked according to JEng's files based on Henlor's masterpiece and my own K1 Max.
Designed for Mellow's/VzBoT's T8 Oldham coupler (22 mm diameter) - I also modified the screw lid accordingly to achieve up to 0,235 mm tolerance on Y - bottom level of the oldham.
V2 (2025/03/09) - undercut to even the screws.
You may still need to sand the middle part of the coupler to gain some additional Y play.
V3 (2025/03/09) - 1 mm clearance around Oldham to give it more play; two versions: for FHSCs or for the Ultra Thin Flat Wafer Head Screws.
Bottom part of the Oldham coupler is about 2 mm height. Middle wants to play in Y axis so your screw lid mounting screws' heads should not be more than 2 mm over the Oldham base.
BOM for one carriage:
- 2 x M3 standard heat insert (M3x4,6x5,7)
- 2 x M3x12 (for the coupler)
- 2 x M3 screw for the lid cover (8-10mm long)
- 1 x M3x25
- 1 x M3 square nut
- 1 spring (optional e.g. from a ball pen)