1 / 4
Regulated Creality K1, K1C, K1 Max Z Carriage for T8 Oldham Coupler — zdjęcie 1
1 / 4

Regulated Creality K1, K1C, K1 Max Z Carriage for T8 Oldham Coupler

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Inspired by Derrick's Oldham coupler mount but with the manually adjustable Z axis; STEPs

Ocena
0 / 5
Polubienia
25
Pobrania
106
Wydruki
0
Wyświetlenia
816
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution — Noncommercial — Share Alike

Inspired by DerrickDarrell's Oldham coupler mount but with the manually adjustable Z axis. Based on @JEng CAD files (V2) and drawn from sketch - still in STEP files. Tolerances checked according to JEng's files based on Henlor's masterpiece and my own K1 Max.

Designed for Mellow's/VzBoT's T8 Oldham coupler (22 mm diameter) - I also modified the screw lid accordingly to achieve up to 0,235 mm  tolerance on Y - bottom level of the oldham.

V2 (2025/03/09) - undercut to even the screws.

You may still need to sand the middle part of the coupler to gain some additional Y play.

V3 (2025/03/09) - 1 mm clearance around Oldham to give it more play; two versions: for FHSCs or for the Ultra Thin Flat Wafer Head Screws.

Bottom part of the Oldham coupler is about 2 mm height. Middle wants to play in Y axis so your screw lid mounting screws' heads should not be more than 2 mm over the Oldham base.

BOM for one carriage:

  • 2 x M3 standard heat insert (M3x4,6x5,7)
  • 2 x M3x12 (for the coupler)
  • 2 x M3 screw for the lid cover (8-10mm long)
  • 1 x M3x25
  • 1 x M3 square nut
  • 1 spring (optional e.g. from a ball pen)

Tagi