Rekon 10 Pro DJI O3 & O4 Mount - With integrated XT90 and Action Camera Finger Mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Forward O3 O4 camera mount on Rekon 10 Pro eliminates prop view; with integrated XT90 & finger mount for action cams.
- Rating
- 5 / 5
- Likes
- 5
- Downloads
- 102
- Makes
- 1
- Views
- 546
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution
This TPU front-end camera mount for the Rekon 10 Pro frame allows you to mount an O3 or O4 camera far enough forward, thereby removing propellers from view. It also provides an integrated finger mount, allowing you to attach an action camera. If you use this mount with the GoPro superview setting, your props are guaranteed to be free from view. The O4/O3 camera can be titled any desired angle from 0 to 35 degrees. There is an integrated slot to slip in an XT90 male pigtail
Check out my YouTube video showcasing a build using this part:
https://youtu.be/CxsEEGlc1K0
Key Features:
- Custom Fit: Specifically designed for the Rekon 10 Pro
- Durable Protection: TPU material absorbs impacts and protects the frame during landings.
Additional Hardware Required:
- For an O3 camera you will need a 300mm DJI O3 MIPI cable (eg: Flywoo DJI O3 Coaxial MIPI Camera Cable) https://rotorriot.com/products/dji-o3-coaxial-cable-choose-length?variant=43791646425318)
For an O4 camera you will need a 300mm DJI O4 MIPI cable (eg:
https://rotorriot.com/products/dji-o4-coaxial-cable-choose-version?_pos=1&_sid=3d5e8c65c&_ss=r&variant=45762873983206) - 1 x M5 x 20mm hex bolt (for securing the GoPro to the mount)
- 1 x M5 nut (for securing the GoPro to the mount)
Printing Specifications:
- Material: TPU
- Infill: 20%
- Supports: Required (ideally choose tree support in a cubic pattern)
- Orientation: Print in the default STL file orientation
Installation Steps:
- Print the Camera mount
- Use TPU material with 20% infill
- Print with supports (ideally choosing tree support in a cubic pattern)
- XT90 Pigtail Connector (optional)
Slip in a XT90 male pigtail connector routing through the double round slits (where the XT90 cable will sit) and then up into the channel at the top of the mount (into the shape of the XT90 connector)
- O3/O4 Camera Placement
Use the default O3 or O4 Camera screws to adhere the camera to the mount and position the angle to your preference. Route the coax cable from the camera into the small channel slit at the very bottom of the mount forming the H shape that ties the walls of the mount together and the XT90 mount above
- Mount It
Place the TPU mount over the Rekon 10's front two front standoffs
- Action Camera Mounting
- Adhere an action camera to the finger mount fins on top
- Place an M5 nut deep into the hexagonal opening of the finger mount
- Use a 20mm hex bolt and rotate it through the finger mount opening on the opposite side to secure your action cam
Watch It in Action:
Check out my YouTube video showcasing a build using this part:
https://youtu.be/CxsEEGlc1K0
Support:
Have questions or need assistance? Drop your comment on my youtube video, and I’ll be happy to help!