Blind Hold Down Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.16 – €0.19 net (excluding VAT)
For file: BlindHoldDownBracket_0.4n_0.2mm_PLA_MK4S_11m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €0.17 excluding VAT (range midpoint).
- Weight reported by the author
- 2 g
- Print time reported by the author
- 10.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Holds your blinds in place.
- Rating
- 0 / 5
- Likes
- 5
- Downloads
- 13
- Makes
- 1
- Views
- 68
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
Gcode files include:
- organic supports for the holes
- 100% infill modifier for the post
Recommended print settings:
- Material: PLA / PETG
- Layer Height: 0.2 mm or less
- Infill % : 50+, 100% in the post
- Supports: Yes, for holes (Organic/Tree)
- Print Orientation: Default as modeled
- Brim: Optional
One of my brackets broke, so I designed a replacement.
The original looks like this:
One is used at each end to hold the blinds in the lowered position, especially on a door that swings open.
