1 / 3
Aruba AP 220 Wall Mount - thin
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
An extra thin wall mount for Aruba access points. Meant for e.g. wodden-bars where there is no lack of space for cables.
- Rating
- 5 / 5
- Likes
- 9
- Downloads
- 100
- Makes
- 0
- Views
- 424
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- BSD License
We needed a mount that would take up less space and mount on a standing wooden bar or part of a shelf. We did not need a spacer to make space between AP and wall for cables.
Thanks to Hegzdesimal and his FreeCAD model, this was done in a jiffy.
Printing
- print with 3+ perimeters and 0.6mm nozzle or 5+ perimeters and 0.4mm nozzle
- use high layer height for stability (e.g. 0.32mm)
- use aligned linear infill, for nice surfaces. 20% to 90% is fine. Use 50% because why not.