Counting matching models…
(NOTES) This is a ceiling mounting bracket for the Aruba AX series APs. This is equivalent to the AP-MNT-MP10-E I personally custom made these, as the cost of an Aruba brackets are $34 each or $340 for 10 of them! Just wanted to share…
On C71, C72, C73, C74 you need to extend wheelsbase by swith plastic bearing bushing to additional 1mm in rear wheels. Just dissasembly car and swith plastic bearing in rear axle.
Simple Aruba Accesspoint Stand. derived from vivap2p "Aruba Access Point Mounting Bracket". Printable without supports, brim recommended.
This is a 15/16" or 23.81mm (The larger size) suspended ceiling mounting bracket for the Aruba AX series APs. This is equivalent to the AP-MNT-MP10-B The red flat piece in the middle is a sample to simulate the ceiling bracket (SUPPORTED…
Simple mount for Aruba APs (AP-115 / IAP-115 in my case but I believe their mount is somewhat standardized so it should work for others as well). See pics for what the mount looks like on the AP. This mount is only meant to be a wall…
Drywall/ceiling mount for Aruba AP500 series WiFi Access Points Aruba's AP500 series do not come with any mounting hardware, this simple mount allows you to screw-mount this style of AP to a wall or ceiling or other solid surface. This…
I had a hard time printing the tile boxes from woshee , the overhang just left strings everywhere. I rebuilt it from the ground up and added a 45* angle to make it easier to print. I added a few minor changes but kept the spirit of the…
We needed a mount that would take up less space and mount on a standing wooden bar or part of a shelf. We did not need a spacer to make space between AP and wall for cables. Thanks to Hegzdesimal and his FreeCAD model, this was done in a…
This is a simple little tile organizer for Karuba. I printed a few other pieces off Thingiverse that worked great, but I wanted the tile organizer separate from the gem holder. This keeps everything organized in a sleek little package…
This is a remix of Scorbin's remix fromThingiverse, Thing was originally done by RevK. Really liked the design but needed to install on to existing network jack boxes in my ceilings. Just mount it to the drop ceiling mount that comes in…
This is a new proved low profile mounting solution for all new Aruba Networks Accesspoints. Easy to print, really strong enough to hold even the heaviest AP-555 or AP-655. You can print vertical as many as possible on your build plate.
Simple insert to have everything ready directly on the table. Print one of each except 4 "tiles and meeples" and 4 "Tiles lid" OR 4 "Tiles lid thicker". This one is prettier but needs to be printed with a smaller nozzle than the one I…
I recently purchased another copy of Karuba to play with up to 8 people and I couldn't get it all to fit in the box. So I designed a minimal Crystals container so that I could fit it all in one box. It all fits in the box as shown. My…
Complément d'information Les petites équerres doivent pouvoir servir pour un montage en demi-rack (half-rack), mais non testé. Les tiges des équerres moyennes et grandes nécessitent des supports mais apportent une excellente rigidité.
This is a proved mounting solution for the older Aruba Networks Accesspoints. Easy to print, strong enough to hold even the heaviest AP-330 series. Works with the original clip.
This only for Aruba 305 AP. Other AP may have problem with RJ45 connector. So please check AP model before print. All file upload with step file, so you can edit it easily. Aruba_AP_Mount.stl part need download on…
This is an Aruba wifi AP stand. It is free standing and can be built to stand anywhere from a few inches to 7 or 8 feet tall just by cutting different lengths of PVC tubing. It doesn't use any special hardware except for the Aruba wall…
We designed this helpful dovetail box for the well known adventure game KARUBA. The players stuff fits perfectly in it. The color of the lid is corresponding with the players color. Please also note our dovetail TOKENBOX for Karuba,…
Bought a HPE 2530-24G-PoE (J9773A) but the fan had failed, a replacement Noctua NF-A4x20 12V PWM 40mm fan was slightly smaller than the original so needed a spacer to fit snugly without being able to move. Realistically probably not…
Different attachment mechanism
Question mark tile for an expansion for the Karuba game. Rules for the expansion https://cdn.haba.de/documents/familienspiele-anleitung/haba-karuba-add-on-2016.pdf Original tiles. https://www.thingiverse.com/thing:3327875
We designed this helpful dovetail box for the well known adventure game KARUBA. The chrystal and gold tokens as well as the bonus plates fit perfectly in it. Please also note our dovetail PLAYERBOX for Karuba, thanks. Have fun. Material:…
Aruba Networking AP200, AP300 wall/ceiling mounting kit. This is for mounting these APs to a wall or ceiling (including angled ceilings). It uses a two (2) part mount to allow for the fitting of the mount base without having to hold onto…
Just a little Firewall mount for the Aruba Instant On 1930 switch. I did not want to place the Firewall directly onto the switch since the fw uses the housing for heat dissipation so I designed a little mount for it. After attaching the…
This is adapter “plate” for velcro mount found on thingiverse (Aruba 500-series wifi access point velcro/ziptie mount, thing:5887352). I wanted to mount my “mobile” APs in proper way to standard camera tripods with G1/4 screw and I wanted…
This ornament is a creative fusion of Jeju Island's traditional Harubang statues with Western Christmas motifs. Originally symbolizing protection and fertility, these ancient Korean figures are reimagined with added wings and a loop on…
Custom clamp that fits my “ Aruba AP Wall Mount - thin ” in order to mount AP on the underside of Wire Cable Trays (Gitterbahn Kabeltragsysteme). Customizing the wire distance for your specific cable tray use caliper to measure outer and…
I have a Aruba 2920 Switch, where a module was installed in the back, but was removed to save some power. To cover the now empty slow I designed this cover. It is based on the original cover the switch comes with if there is no module…
I needed a way to mount my Aruba IAP-105 access point to the beam in my shop. The easiest solution as I saw it was to create an interface that attaches to the AP and "clips" onto the metal beam. Related to this, I needed some wire guides…
Karuba Expansion Meeples, not affiliated with Karuba
This is a game piece for the board game karuba
Náhradní díl držáku WiFi Aruba AP205 + čudlík na AP
Want to mount your Aruba AP onto a Pole or other round surface? Grab some zip-ties, print this part, screw it on and go! Usage It screws onto the back of the AP with the original screws (M4 I think?) loop two zip-ties of sufficient length…
Done this for customer which wanted to cover 360 degree event with wifi from one spot. We decided to use Aruba 535 AP with AP-MNT-E original mount which is screwed on it and put on standard speaker stand (35 mm tube). Probably any Aruba…
I have a Aruba 2920 Switch, where a module was installed in the back, but was removed to save some power. To cover the now empty slow I designed this cover. It is based on the original cover the switch comes with if there is no module…
I wanted to be able to mount my AP to a magnetic surface so I added two holes to the mount plate to hold two 20x5mm round magnets. I specifically made the spacing so it would connect to the screws on one side of a double gang US…
Wall mount for Aruba access point. Apin0103 Category: Household
Done this for customer which wanted to cover 360 degree event with wifi from one spot. We decided to use Aruba 535 AP with AP-MNT-E original mount which is screwed on it and put on standard speaker stand (35 mm tube). Probably any Aruba…
Designed and printed this to mount a 24 port Aruba switch under a desk in an IT lab at work. Used 20% infill and PETG
Made a 3D mdoel of my friend. Coincidentally made it look like hes on a stripper pole. Looks even funnier when it spins. Printed on my A1 mini: - Slim tree supports - 20% Infill - PLA Basic - Walls 2 0.12 mm height
Karuba is out of print! The one I purchased from eBay had missing pieces. I designed the replacement and then made a whole expansion set! Plus, an easy-to-file shelf system to make gameplay faster. Enjoy. Not affiliated with Karuba.
Shelf organizer for Karuba, Number slots. Fits printable tiles and original cardboard pieces. 7 shelves fit per box.
I have 6 of these AP22's scattered around my house indoors. They're amazing and give me perfect internet everywhere. The signal never quite reached the hot tub / pool area. I ran a Cat8 outdoor ethernet cable with power-over-ethernet to…
Wall mount for the Aruba AP 220 series access points. Post-Printing Assemble with countersunk screws. Category: Other
This is a quick simple print to mount an Aruba switch to a wall mounted wire rack that has 6mm/ ¼" cross bars. I used M4 screws to attach the clips to the switch in its rail mounting holes.
Saw RevK's awesome mount bracket, but realized the only mounts I had were the 9/16 rail mounts. Remixed his original mount to fit. Hope it comes in handy for someone. Print Settings Printer Brand: Creality Printer: CR10S PRO Rafts: No…
I made this because my company refreshed their old Aruba AP's with some new ones and they didn't buy new mounting hardware to go with them, so we zip tied the new ones to the old mounts. I figured if anyone else did the same thing that a…
Helmet , late 1800s–early 1900s. Africa, West Africa, Nigeria, Yorùbá-style maker. Wood and paint; overall: 62.9 cm (24 3/4 in.). The Cleveland Museum of Art, Gift of Katherine C. White 1969.5
Created this when the family was going to Aruba and attached them to our luggage so it was easier to find at baggage claim Took an outline of the island and the Aruba logo and mixed it together.
A simple stand for Aruba 303H/503H/505H. Recommend use 4 or more wall loop. wall plate mounting bracket: https://www.thingiverse.com/thing:5214425
Aruba outdoor AP mount headblock assembly and mounting arm assembly. The Arm is mostly for a smaller AP-365 AP to be attached to a 1.5 inch pipe. The headblock assembly is just the head assembly that goes onto the AP to be adapted into…
I have these deployed in a building with no air conditioning and had some concerns about threading directly into the plastic with the weight and additional heat from the AP so I updated these for use with M3 heat sets. I specifically set…
