Hilti VC 10-22 wall mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holder to put Hilti VC 10-22 onto a wall
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 33
- Makes
- 0
- Views
- 350
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Organizers
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
For work I have a Hilti vacuum cleaner in my van. The vacuum cleaner can be used for solids and for liquids.
After using the VC for liquids, the HEPA filter needs to be cleaned (washed) and left to dry when you want use the VC for dry stuff.
When the wet filter is in the VC, the drying goes very slow and eventually mold will get into the filter (accompanied with a lot of stench). So I created these 2 simple strips with hooks. The top half of the VC can be placed on the hooks while the collection bin stands on the shelve below the top part. Evaporated moist in the filter now can easily escape. When the filter is still dripping water after cleaning, the water will drip into the collecting container.
Print the part 2 times on its side. No supports needed.
When mounting the 2 parts on the wall, make sure they are at the same height with the center of the holes 140mm apart.