103 models
Please as a simple return for the job... Like, Share, and Post your prints ! Thanks ! Optimized for printing vertically like a breez.. No supports needed ! ;) Original file fit on 35mm diameter tube (Festool, Bosch,…) Update 26 March 2023…
A mount for the new Hilti Nuron akkus with latch to hold the akkus in place.
Printed standing up with no supports. Compaired to other models this one is very fast to print and does not use much plastic at all but still locks in place.
Easy printable Hilti 22V battery Adapter with low supports. I used this for the current connection: HELLA 8KW 863 934-003; 2,8 x 0,8 https://www.amazon.de/gp/product/B008ZZ6Q9Q/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1
A 3D printable wall mount designed for Hilti NURON 22V power tools such as drills, saws, and impact drivers.
This is a holder were you can store a Hilti accupack. A remis with the Hilti logo.
A Adapter designed to conact to the main terminals of the Battery. I have designed this to be used with an RC charger to charg small Drone Batterys on the go. Pro: The Battery has under voltage Protaction, Balancing functions and lots of…
Wallmount for Hilti Charger C4/36-350 You'll need 4x M4x10 bolts and M4 nuts for the connectors.
A battery holder for Hilti B22 Battery for the workshop, garage or your work van. Importen info about Gcode: It print with a 2mm brim to add strengh to bed. I just took a deburrs on the bottom edge and it was perfect after. The 2 holes to…
I printed in PLA at 15% infil with no supports, and it held the B 22-85 I tested it with Holds the battery well enough to not fall out, but loose enough to easily take the battery out when needed. I had designed this and printed it for a…
Printinstructions best to use PET or ABS for strength no need for support Prints with a 0.6mm Nozzle fine as well print Hiltihook 2 times Hiltiholder 1 time you also need 2 T-clips from @ Line Arc Line…
this model fits hilti 18v and 22v battery's it can be mounted to the wall printed in place ready to use with perfect fitment
The holder fits the 14V to 36V batteries. NOT the Nuron batteries.
Printed standing up with no supports. Compaired to other models this one is very fast to print and does not use much plastic at all but still locks in place.
A wall Mount Akku holder for Hilti Nuron Akkus extra Stabiel
Was designed for my desk which came with threaded holes, but can add to your own. Fits with the Hilti SFE 2-A12 installation driver with the chuck, bit holder, and no attachment. Also fits the SID 2-A12 impact driver and SFE 2-A12 drill.…
Feel free to use it… The design was made with OnShape I made it from ASA with 0.2mm layer with 30mm/s.
For my job I have Hilti Nuron tools. Currently I own 4 batteries. I have 2 of these mounts connected to a piece of board. The 4 batteries can be clicked onto the mounts. The board with 2 mounts and 4 batteries can be carried around. Added…
Three different mounts for Hilti B22 batteries Vertical model does not clip, and is shorter. Can totally be used horizontally for stationary purposes. Horizontal models do clip on, and were designed to be placed in a van. So they wouldn't…
i saw this adapter an thought i could create a box above and put a fuse and switch in it so i can control 24V DC motors without a power outlet nearby Needed components: Hella 8KW 054 944-003 connector :…
This connector can distribute energy from the battery for other purposes. Tato patice je navržena pro HILTI baterie.
obal na SDS vrtáky
Hilti charger for mount in car/vans or shop, but still want to be able to take it with you out. It slide at bit tight, but it is on purpos, because if it sits in a van it would maybe slide out, but you can allways scale the male part a…
I found a ton of Hilti B22 battery hanger STL's but none for the tool itself. So I broke out the Micrometer, fired up Fusion 360, and designed one to share with anyone that needs one. I printed this model out of Bambu Labs basic PLA with…
Air turbine Hilti WSJ 110 Print instructions Category: Parts Summary Air turbine Hilti WSJ 110 Print Settings Printer Brand: Anet Printer: A6 Rafts: No Supports: Yes Resolution: 0,35 Infill: 100%
Hallo, biete hier Kostenlos mein aufwendigen entworfenen Usb Adapter für die Hilti Nuron Akkus an. Alles was ihr hierfür brauch: USB Converter von in meinen Fall Aliexpress: BS Hohe qualität DC 6V-40V Zu 5V 3A Doppel USB Ladung DC-DC…
Das ist ein Ersatzteil für den Koffer für die Mauernutfräse DC-SE20 von Hilti. Da die normalen Clips bei mir alle nach ca. 1.5 Jahren abgebrochen sind habe ich mal versucht diese nachzuzeichnen in Fusion. Sie sind nicht perfekt und…
This is an adapter to use Dyson stick vacuum accessories with a Hilti VC 40-U industrial wet/dry vac. This is useful if you need to pick up large quantities of fine dust that would clog a household vacuum The Hilti vacuum is available for…
Smaller Trays for Hilti Consumable Case Fully configurable OpenSCAD model for smaller trays, compatible with the Hilti Consumable Case (part number 2195565). Printing guidelines Setup OpenSCAD and export the stl file (optional) Optionally…
Porta batterie 18 volt vi consiglio di stamparlo resistente altrimenti può rompersi.
Drywall Gun Collated Magazine Attachment - not sure which model (Looks similar to Hilti SMD collated magazines attachments - leave a comment if you know what this is for) - a friend asked me to make a copy as they are no longer being sold…
The drill mounts use M8 fasteners. The battery mount use #10 fasters. Sorry for mixing metric and imperial!
Dies ist ein Ersatzstempel für den Hilti Tube Dispenser CFS-DISP (Art.-Nr. 2005843) . Das Teil ersetzt den originalen Stempel und stellt die volle Funktion des Dispensers wieder her. Der Stempel wurde praxisnah und stabil ausgelegt und…
A collection of different wall mounts, will increase it over time.
Spare part for Hilti Te42. Category: Parts
Print instructions Unassociated tags: drill lock, HILTI TE60 Category: Machine Tools Summary Sk: Zákazník mi doniesol vŕtačku HILTI TE60 ktorá mala rozbitý zámok vrtáku. Servis Hilti odmietol predať tento rozbitý diel samostatne, a trval…
Is an alternative for Hilti suitcases if they are filled with other things.
Die robusten SF-121-Akkuschrauber überleben meist alle Akkus. Es gibt zwar Austausch-NiCd-Akkupacks, aber mal ehrlich: Welcher echte Maker will sich mit so einer alten Technologie begnügen? Die Nachhaltigkeit gebietet es, hier ein Upgrade…
4x 3mm nails of 20mm length for clips 2x springs for clips - we used default springs from ender3 heatbed (20mm length, 8mm diameter, 0,9mm wire) 4x 14mm M3 screws 4x M3 nuts 15mmx0,3mm copper grounding tape for contacts 2x 150mm copper…
to finish this you only need 1 spring of a OD 4mm and 20mm long the wire thickness 0.30mm and 1x M2 bolt of 6mm long movie link: https://odysee.com/@UntangleWORKS:a/UNW-Hilti-case-holder:3 part 2…
Wall-mounted battery holder for Hilti B22 lithium-ion batteries. Designed for clean workshop organization – keeps batteries off the bench and always within reach. ✅ No supports needed ✅ Printed in PETG for durability ✅ Tested fit – 100%…
Simply put this spacer between the bezzel and lcd display to increse pressure on rubber contact pad. As simple as that.. Printed on Prusa Mini, I recommend 0,25mm nozzle with prusament PLA. 0,1mm layer height
wallmount to store 3 Hilti SFBxxx NiMh Akkus
Halterung für Makita/Hilti Akkus Battery holder for Makita/Hilti
100% infill printing is recommended . Protects against scratches on soft wood.
Replacement for broken/worn down rotary knob Part definitely needs supports!
Dieser Halter wurde entwickelt, um einen Hilti-Schlauch sicher und stabil an einer Leiter oder alternativ an einem Rohr zu befestigen. Ideal für den Baustellen-Alltag – kein Werkzeug nötig, einfach einhängen und loslegen. Perfekt geeignet…
I've lost the original part. So I designed this part by empirical intuition. The snap in version was too weak with PETG, so i've designed a version for a M3x10mm screw. Assembly was fiddly but the grinder is on duty again.
I made a battery holder for my hilti batterys. De sliding part is 39,70mm wide. See photo for reference. This one holds the battery in place, I use it in my garage I suppose it could be uses In a van aswell.
Mount for the HILTI MQ System. 30mm Distance - 2x holes for M5 screws.
HILTI Toolorganizer box made from PETG, Layer 0.3mm.
IKEA Skadis Holder for HILTI PD-S. Print Settings Rafts: No Supports: No Resolution: 0.2 Infill: 15
This is a replacement latch for the older Hilti TE5 case and possibly other Hilti cases using the same design.
Sometimes I encounter a water leakage. Water flows wherever it wants to go. On some cases water gets beneath unreachable place. When removing the water from the ground in front of such an unreachable space, the water just keeps flowing.…
Print in TPU for best results
Wurde erstellt um den POA 20 auf rechtwinklige Ecken auf zu setzen Aufgrund von Gewichtsgründen habe ich mit 100% Infill gedruckt, da ansonsten das Konstrukt zu leicht für das Prisma gewesen wäre. PLA/ASA Infill 100% Supports nötig
Print Settings Printer brand: Bambu Lab Printer: A1 Rafts: Yes Supports: Yes Resolution: 0,2 Infill: 100% Filament brand: Winkle Filament material: PLA ASA
We needed 2nd floor into the toolorganizer from HILTI for small parts.
Replacement lock for the drill depth lock on the HILTI TS5 DRS vacuum attachment Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0,2 Infill: 80% Filament: Unknown PLA Category: Hand Tools
Battery mount for Hilti Nuron and older style 22V battery.
Hose adapter from the sander HILTI WFE 150 to Festool hose Cleantec (D27)
It press-fits onto both the hose and the dust extractor port on the Sherwood 13in Thicknesser model MBSC-1936 but may suit other models I printed it in eSun copper silk-PLA. You'll want to print it vertically, larger Sherwood end down…
Erregerkolben für Hilte TE 76 Schlagbohrmaschine! Passt auch für andere TE Modelle In PETG oder noch besser ABS drucken! Original Hilti Ersatzteilnummer: 330059 Zusätzlich benötigt: O-Ring 24,99x3,53mm
Gridfinity Box for the HILTI Setting Tool
Es handelt sich um ein Batterieadapter für den HILTI B22 Akku
Wall-mounted battery holder for Hilti Nuron lithium-ion batteries. Designed for clean workshop organization – keeps batteries off the bench and always within reach. ✅ No supports needed ✅ Printed in PETG for durability ✅ Tested fit – 100%…
Erregerkolben für Hilte TE 76 Schlagbohrmaschine! Passt auch für andere TE Modelle In PETG oder noch besser ABS drucken! Original Hilti Ersatzteilnummer: 330059 Zusätzlich benötigt: O-Ring 24,99x3,53mm
Drywall Gun Collated Magazine Attachment - not sure which model (Looks similar to Hilti SMD collated magazines attachments - leave a comment if you know what this is for) - a friend asked me to make a copy as they are no longer being sold…
Replacement lock for the drill depth lock on the HILTI TS5 DRS vacuum attachment Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0,2 Infill: 80% Filament: Unknown PLA Category: Hand Tools
For my job I have Hilti Nuron tools. Currently I own 4 batteries. I like to have my batteries stored in a way that I can easily get them and check what amount of power is left in them. This storage box can be placed in a drawer of my…
For work I have a Hilti vacuum cleaner in my van. The vacuum cleaner can be used for solids and for liquids. After using the VC for liquids, the HEPA filter needs to be cleaned (washed) and left to dry when you want use the VC for dry…
The adapter make with a strong Plastic. The rings make with a malleable plastic.
Scan of battery i uploaded a low variant aswell
For my Hilti VC 10-22 vacuum cleaner I have some cheap accessories bought at Aliexpress. The set of accessories comes with an adapter to put the accessories on the original Hilti vacuum hose. So, you have the hose, the original adapter,…
Materiale pa66+cf20 riempimento al 100% in alternativa qualsiasi nylon con fibra di carbonio, per le altre impostazioni di stampa fare riferimento al tipo di filamento utilizzato.
Slide and good to go. Printed in PETG, 0.2mm 2 walls / 15% / Supports on the inside
It press-fits onto both the hose and the swivel vacuum port on the Kreg K5 with the connection being pulled together more when the vac is running. It only protrudes 15mm inside the K5 fitting, and the thickness tapers so as much as…
Useful pad for grinder dust collector from Hilti by cutting tiles . Gives you more working surface and stability for cutting tills with additional cutting guide
🔋 Hilti 22V Battery Wall Mount – Reinforced Version This is a reinforced version of my original Hilti 22V battery holder , redesigned to improve strength and wall mounting reliability for workshop and van use. The back plate and side…
This is a 3D printable stand/holder for Hilti 10.8V batteries , designed to keep the battery stable when placed on a workbench or shelf and to protect the bottom part from impacts and wear. Perfect for workshop organization and keeping…
je conseil d'utiliser de ABS et 40 ou 50 pourcente de remplissage
Wall-mounted battery holder for Hilti Nuron lithium-ion batteries. Designed for clean workshop organization – keeps batteries off the bench and always within reach. ✅ No supports needed ✅ Printed in PETG for durability ✅ Tested fit – 100%…
Wall-mounted battery holder for Hilti Nuron lithium-ion batteries. Designed for clean workshop organization – keeps batteries off the bench and always within reach. ✅ No supports needed ✅ Printed in PETG for durability ✅ Tested fit – 100%…
Hilti B12/30 battery cover. Printed from PLA layer 0.2 and infill 15%. Print in portrait with support.
Handling of batteries is secured by a battery lock. 1st model Fixing the model using through screws with a diameter of 4 - 4.5 mm 2nd model Fixing the model using a plastic screw with a diameter of 3 mm. Printing with a PLA layer of 0.2…
The holder does not include a lock for locking the battery. 1st model Fixing the model using through screws with a diameter of 4 - 4.5 mm 2nd model Fixing the model using a plastic screw with a diameter of 3 mm. Printed from PLA layer 0.2…
Wall-mounted battery holder for Hilti B22 lithium-ion batteries. Designed for clean workshop organization – keeps batteries off the bench and always within reach. ✅ No supports needed ✅ Printed in PETG for durability ✅ Tested fit – 100%…
Wallmount for Hilti Charger TCU 7/36 You'll need 4x M4x10 bolts and M4 nuts for the connectors.
Replacement adapter for hilti concrete coring vacuum boot. This allows a standard shop vac to be attached to boot for suction of cooling water and swarf during coring operations. connection ends are lined with TPU to aid in sealing fit.…
Printed at a height of 0.20 with a 0.4 nozzle To make the logo visible, use a color change for one layer in the slicer.
For my job I have Hilti Nuron tools. Currently I own 4 batteries. I like to have my batteries stored in a way that I can easily get them and check what amount of power is left in them. This storage box can be placed in a drawer of my…
