Stempel für Hilti CFS-DISP | Stamp for Hilti CFS-DISP
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ersatzstempel für Hilti CFS-DISP Auspressgerät | Replacement stamp for Hilti CFS-DISP Tube dispenser
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 49
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Dies ist ein Ersatzstempel für den Hilti Tube Dispenser CFS-DISP (Art.-Nr. 2005843).
Das Teil ersetzt den originalen Stempel und stellt die volle Funktion des Dispensers wieder her.
Der Stempel wurde praxisnah und stabil ausgelegt und erfolgreich im realen Einsatz getestet. Er eignet sich für typische Anwendungen wie das Verpressen von Dichtstoffen, Klebern oder Mörtel aus 310ml-Kartuschen.
Druckparameter (wie verwendet)
Material: PLA
Walls: 4
Top/Bottom Layers: 4
Infill: 40 %
Ausrichtung: stehend, wie hochgeladen
Für höhere Temperaturbeständigkeit oder Dauerbelastung können auch PETG, ABS oder Nylon verwendet werden.
⚠ Hinweis:
Dies ist kein Originalteil von Hilti. Das Modell wurde unabhängig erstellt und steht in keiner Verbindung zu Hilti. Nutzung auf eigene Verantwortung.
Update 15.01.2026: Fehler beim Aussendurchmesser festgestellt und berichtigtes Modell hochgeladen.
-------------------------------------------------------------------------------------------------------------------------------
This is a replacement stamp for the Hilti Tube Dispenser CFS-DISP (part no. 2005843).
It replaces the original stamp and restores full functionality of the dispenser.
The part is designed to be robust and practical and has been tested in real use. It is suitable for common applications such as dispensing sealants, adhesives, or mortar from 310ml-cartridges.
Print settings used
Material: PLA
Perimeters/Walls: 4
Top & Bottom Layers: 4
Infill: 40 %
Orientation: vertical, as uploaded
For improved heat resistance or long-term durability, PETG, ABS, or Nylon are recommended alternatives.
⚠ Disclaimer:
This is not an original Hilti part. This model was created independently and is not affiliated with or endorsed by Hilti. Use at your own risk.
Update January 15, 2026: Error in outer diameter corrected and uploaded new model.