Counting matching models…
GENERAL The model is designed to be (de)mountable with allen bolts and nuts. As such the finished model is very suitable for educational purposes. Engine A Overhead Valves engine is an internal combustion engine with the valves placed in…
A Over Head Valve (OHV) engine is an internal combustion engine with its valves placed in the cylinder head. This model is designed to be (de)mountable with allen bolts and nuts. As such the finished model is very suitable for educational…
This is a tray made to hold valve lifters and pushrods from a Chevy LS engine. Useful during tear down and rebuild process to keep lifters in proper order so they can be returned to the same bore/cam lobe. This was original work on my…
Yet another pushrod keeper. However this one has two new features: It works with thicker 3mm thick 3d printed horns It has a notch so you could use needle nose pliers to snap the rod into place. THREE pushrod sizes are offered. 0.8, 1.0,…
Simple remix of https://www.thingiverse.com/thing:3442863 for smaller (1mm or 0.8mm, idk which one I have) push rods. Also added a shorter version. Reason posting it here: thingiverse is super slow and unreliable nowadays.
I didnt have an org tray for my valvetrain so i decided to design a super simple one. I use this to keep my rocker arms, pushrods, seals, and locks in order. I used this for a chevy V8 LS1 but im sure will work for plenty others. I also…
In this type of gearbox, all the gears of the main shaft are in constant mesh with the corresponding gears of the countershaft. A sliding dog clutch (shifter) is provided on the main shaft. This gearbox is designed to be coupled to this…
This is a printable pushrod for ericthepoolyboy's ls3 engine. You can 3d print this instead of having to buy the steel ball and m3 rod, each one is only about a gram with 100% infill. Will require cutting the tiny little side supports…
I found the PushRod included with @chewey's seesaw mechanism (linked as remix source, below) was too short, leaving “slop” in the mechanism and preventing full eject actuation. This model is simply a lengthened version of that one part,…
This thing was made with Tinkercad. Edit it online https://www.tinkercad.com/things/0Qzi551A3DN Category: R/C Vehicles
Original part has a flat bottom. Modified part has the angled bottom.
Im feeling nostalgic and bought a Raptor 30. But parts are scarce and expensive on the flea-bay. So I made some. Up for your printing enjoyment is Thunder Tiger Raptor Tail pushrod guides. I printed them out @ 0.2 in Ovature PLA. I will…
My old Ford 302 V8 needs new head gaskets, which means the heads have to come off, and to keep the pushrods from just rolling around the garage I decided to make a holder to keep them corraled. I'm too lazy to drill 16 holes in a wood…
Pushrod Keeper for Turbo Timber Evolution / E-flite Timber – 1mm Pushrod Designed for: 1mm pushrod, suitable for 90° bent pushrods Infill: 100% Layer height: 0.12mm (for best performance) Material: PLA possible, PETG recommended for…
These are a must print to get your Ferrari F1 Lego Technic at the proper ride height. If you are looking for custom a custom steering wheel, wheels, tires, halo's, and mirrors, look at my website.…
After the original pushrod holder broke i designed a new one and added two of them to the Heli so it can reduce the vibration in the pushrod. Print Settings Printer: ANET A8 Rafts: No Supports: No Resolution: 200 Infill: 100 Filament:…
A quick cut and shuffle of the two files sourced to suit my needs, making it (hopefully) easier to restore engine back to running order with pushrods going into their original place. Suits Holden L67 pushrods. Should suit LN3/Ecotec,…
A pushrod retainer. Sized for 1.5mm rod, which can be changed in SCAD file. Print Settings Rafts: No Supports: No Resolution: .1 Infill: 20 Filament: Any PETG Category: R/C Vehicles
Dieses Modell ist ein nachkonstruierter Druckstößel (Pushrod) für den Hauptbremszylinder der Vorderradbremse an der Fantic XMF 125 Competition und Performance (Baujahre 2021–2022). Da das Originalteil von Fantic üblicherweise nicht…
I didnt have an org tray for my valvetrain so i decided to design a super simple one. I use this to keep my rocker arms, pushrods, seals, and locks in order. I used this for a chevy V8 LS1 but im sure will work for plenty others. I also…
Pushrod Keeper for Turbo Timber Evolution / E-flite Timber – 1mm Pushrod Designed for: 1mm pushrod, suitable for 90° bent pushrods Infill: 100% Layer height: 0.12mm (for best performance) Material: PLA possible, PETG recommended for…
These are a must print to get your Ferrari F1 Lego Technic at the proper ride height. If you are looking for custom a custom steering wheel, wheels, tires, halo's, and mirrors, look at my website.…
Dieses Modell ist ein nachkonstruierter Druckstößel (Pushrod) für den Hauptbremszylinder der Vorderradbremse an der Fantic XMF 125 Competition und Performance (Baujahre 2021–2022). Da das Originalteil von Fantic üblicherweise nicht…
I found the PushRod included with @chewey's seesaw mechanism (linked as remix source, below) was too short, leaving “slop” in the mechanism and preventing full eject actuation. This model is simply a lengthened version of that one part,…
