CircleCross Fidget Spinner with one 608 Bearing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
My second TinkerCAD spinner, CircleCross. Designed for smaller hands and only uses one 608 bearing. Hope you like it!
- Rating
- 2 / 5
- Likes
- 5
- Downloads
- 51
- Makes
- 0
- Views
- 199
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to push myself a little further in TinkerCAD to see if I could come up with another fidget spinner design and I'm excited to present CircleCross. LOL….yep it's a basic design but I'm still a newbie when it comes to TinkerCAD. I have some friends who are counselors and often have younger clients who tend to open up more when they have something to “fidget” with. So, I print out a lot of spinners for them and wanted to have some original designs that only use a single 608 bearing and fit those with smaller hands.
I got great spin-time from a cheap 608 bearing off of Amazon. I'm sure there are a lot better bearings that could increase spin time, but the cheap ones worked just fine for me. The bearing caps are a remix that I came up with.
Note: The bearing is a tight fit. I use two pieces of wood to sandwich the spinner and bearing then press down until the bearing seats fully. It's not too difficult but does take a little effort.
Links:
- Bearing Caps: https://www.printables.com/model/1221928-fidget-spinner-bearing-cap-for-608-bearings
- Here is an Amazon link to the bearings I used: https://a.co/d/iMTwe83
Printing:
- Supports: None
- Infill: I recommend 100% to provide weight.
- Layer Height: I use .16 but .2 should work just fine.
- Material: PLA