1 / 4
Kalax extension supports
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Supports to increase the top surface of Ikea kalax
- Rating
- 0 / 5
- Likes
- 4
- Downloads
- 14
- Makes
- 0
- Views
- 177
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bambu Lab Parts & Upgrades
- License
- Creative Commons — Attribution
For my new Bambu Lab P1P printer I came up with a placement on a kalax shelf. During installation I was forced to move the printer 7cm forward due to the waste slide when cleaning the nozzle. I modeled a simple holder that is screwed into the ikea kalax cabinet with 4 screws (max dia = 4mm).
WARNING
Ikea kalax is made of thin "paper". Be careful when screwing, this material is not strong enough. I chose screws with a coarse pitch to prevent tearing.