1 / 5
T6 California Abdeckung für Lüftung im Hochbett — image 1
1 / 5

T6 California Abdeckung für Lüftung im Hochbett

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

ENGLISHAs I was sometimes annoyed by strong crosswinds in the T6 California at night because it blew right into the…

Rating
0 / 5
Likes
1
Downloads
13
Makes
0
Views
136
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

ENGLISH

As I was sometimes annoyed by strong crosswinds in the T6 California at night because it blew right into the car through the upper ventilation openings - sometimes with rain - I developed this catch. It can be printed without support, only four magnets have to be pressed in in the end. In my case, the magnets hold without glue.

You need four magnets with the dimensions 4mm x 20mm.

I recommend PETG or stronger material, PLA becomes too soft in the sun or outside.

DEUTSCH

Da mich beim T6 California manchmal starker Seitenwind in der Nacht genervt hat, weil er durch die oberen Lüftungsöffnungen in das Auto geblasen hat - teilweise auch mit Regen - habe ich diesen Verschluss entwickelt. Es lässt sich ohne Support drucken, am Ende müssen nur vier Magnete eingepresst werden. Bei mir halten die Magnete ohne Kleber.

Ihr benötigt vier Magnete mit den Abmessungen 4mm x 20mm.

Ich empfehle PETG oder stärkeres Material, PLA wird in der Sonne bzw. draußen zu weich.

Category: Automotive

Tags