Counting matching models…
Gold bullion stacker with 20 degrees angled slices. Slices are 2mm wide and able to hold 54mm wide bullion package width. If needed, please contact me and I can create stacker for more bullions as well.
Print approx. €3.96–€4.84 excl. taxPreliminary estimate for one variant
Summary This is a model of a VW T1 Bus “Samba” in a kit / gift card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the…
Summary This is a model of a Dodge Charger R/T (1969) in a kit card style. Some characteristic details can be discovered. After printing, the model can be assembled with the help of integrated connectors. The wheels can be turned, but the…
A small stand for displaying coins, personally wanted a way to display my silver bullion coins. Come's out lovely and allows me to display my coins in a great way. Layer: 0.18 Nozzle: 0.4 Infill: 15%
The original was to large for my printer (150mm x 150mm). Chucked it into tinekrcad and chopped it down to fit and can hold 10 cards. Looking for a larger storage check out the original this is remixed from. Box is compatible with PAMP…
This is a container for 1-ounce silver bullion coins. It will fit a stack of 10 American Eagle silver coins, but other coins of the same or smaller diameter may also fit. I printed with random seam position to avoid an ugly vertical seam.…
Schlüsselanhänger ist mit Materialwechsel zu drucken. Keycheain is to be printed with material changes. Schichtdicke 0,10mm / Layer 0.10mm Infill 100 % color change 1,10 → 1,80 → end
10MAY2019: Published my interpretation of a 1:32 (Gauge 1) Southern Railways Bulleid Coach. Some of the smaller, insignificant details, are excluded from the design, or simplified. It was my intention to create a design that shows the…
A replacement holder for a Volkswagen T5 bulli. Maybe it fits somewhere else. My booth cup holder were broken. I replaced them by my own design. You can use them also as a cup holder for the door. I designed one with a closed bottom, just…
Based on the Larry vs Harry Bullitt cargo bike. Has a kickstand and snaps together without glue. Similar scale and designs to my other bike models: Tern GSD Tern HSD Urban Arrow Riese & Müller Load 60 Riese & Müller Load 75 Riese & Muller…
Please read this before any use of the font. ----------------------- This font is for PERSONAL USE ONLY: Do not under any circumstances use the font in public media unless permission is given from designer 3D-Druckwelt or legal reseller.…
The model was downscaled using those bogies so the scale might be slightly of to Ho or OO scale but it should be close to those scales hope you enjoy :) massive thanks to Beusekomse Baan for making the Gauge 1 Model for Printing
This is my WIP Version of a magsafe phoneholder that will be inserted into a placeholder for unsed buttons. OnShape Model Magsafe iPhone Holder
In winter time when charging the akkupack of my bullitt EP8 sometimes the open contact of the mount were flooded during rain - in the morning when I placed the powerpack the electronics promted an error during short-circuit fail. So I…
Schlüsselhalter mit Bulli Schriftzug, mit 3 Haken!
Print 4 layers of 0.3mm. 10x perimeter 0 top and bottom layer Honeycumb infill 10%
Tato úložná krabička je perfektním řešením pro bezpečné uložení vašich zlatých slitků. Uchovejte své zlaté slitky bezpečně a stylově v této prémiové magnetické úložné krabičce. Úložný prostor s víkem pro 12 zlatých slitků Testováno…
This detailed 60mm x 35mm keychain is designed to be printed with a 0.2mm nozzle and a 0.1mm layer height. The 1mm thick left and right sides, which are distinct, can be glued together after printing. For easier alignment during assembly,…
More pictures coming asap! I was looking for a way to have some more storage on my new larry vs harry bullitt, specifically for things like the charger and some tools. Things that preferrably stay with the bike. I found this really cool…
When your kickstand feet are worn down to the bare metal of the kickstand, the time has come to replace them. Print two of these, replace them with the old ones, and you are ready to haul more cargo and/or kids on your beloved Bullitt…
Volkswagen T6 Transporter BULLI Logo Badge – Front Door / Wing Emblem Designed for fitting to the front doors . This badge has been made as a close match to the original style , The design can be printed as either a one-piece or two-piece…
The Bullitt long john cargo bike made by Larry vs. Harry unfortunately doesn't feature mounting holes for a rear bike rack. This mounting adapter can be clamped to the seatpost and has regular mounting points for two M5 screws/bolts that…
Made to hold 12- 1 oz silver bullion coins that have been put into capsules.
Keeps your 1 oz bars organized and spaced apart to keep the bars from rubbing together.
This is Bulli the Octo-Bus 🚌 A crazy Bus with 8 articulated, flexible tentacles. It's inspired by the legendary VW T1. You print the Bulli as single object and 8 tentacles with print in place joints. Each tentacle snaps into an axle from…
This is a holder for the Ortlieb Outer Pocket 2,1 Ltr. It might also work with different size of bags.
4 different coin/ bullion capsule holders. 3 of the files are stackable.
Larry Vs Harry Bullitt Front Panel , split in two This can be used as is printed to your desired Z height ( I went with 9mm with PETG+) or as a router guide for another material. Glue together and I used 8mm bolts to allow a bit of…
If you want to use the Quickloader from Kerbl https://www.kerbl.com/de/product/quickloader-strap/164845/16447, here are some hooks you can mount on the Bullitt Cargo Bike. Please find two versions of the hook. I use the T-hook for the…
The kick stand caps that came with the bike wore through. The local bike shop was not able to get replacements. So... 3D print some. I tried to add a bevel to make it an easier rock up onto the kick stand. The hole is a little large for…
Mounts for a steering damper on a Larry Vs Harry Bullitt. I used this damper: https://www.aliexpress.com/item/1005005831750057.html If you like this model, please throw me a like. Designing the models is time, filament and coffee…
Since my bullitt cargo bike didn't have a standard way to mount a sp connect micro stem mount for my phone, i had to design my own and it works perfect. I used a M6*40 stainless steel torx screw and a M6 lock nut to mount it. I printed…
This handle is intended to close the grip hole of an ikea "Bullig" box. You can print it without support if you don't mind the look of the latch.
All my friends get scared of the bang when I pivot the kickstand of the Bullitt. So I tried to dampen the bang.... and it is nearly away. Printed with extrudr Flex Medium (A98) and 1,2mm walls. Unscrew the old damper and put the new one in.
tolle Idee mit dem Stifthalter habe ich einfach farblich angepasst auf meine Bedürfnisse. Ja die Blaulichtzipfel sind noch ausbaufähig
If you have the front suspension fork from Twenty-Inch mounted on your Bullitt cargo bike, the kickstand legs are to short. I have made these elongated feet, so that both legs of the kickstand will touch the ground. Print Settings Printer…
Larry vs Harry Bullitt back panel bag mount Mount a molle bag on the back of the box area Specifically this bag: https://www.aliexpress.com/item/4001217128838.html It accommodates my ebike battery, and leaves the bottom clear for one of…
Larry Vs Harry Bullitt Bungee Hooks I made these to attach my box cover If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work buy me a coffee (PayPal).…
Small front platform for the Larry vs Harry Bullitt ¼ hole in the top so a GoPro style mount can be installed If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to…
It is good fun to go on adventure trips with my daughter (2j at the time) on our bullitt cargo bike. However she found it even more fun when I sat her on the middle post when going down a hill. So I ended up making a seat for her. The…
Here's my approach to adding a shower to the t6 california camper: Second switch and T-piece to the existing water system, hose connection is a compressed air coupling. Shower hose comes from the outdoor shower from Decathlon . (ingenious…
Verson 1 of my battery brackets for mounting the battery sled on bikes without bottle bosses. From my first try I've learned that this needs to be printed in a high Shore hardness TPU as soft options might be cause trouble with the…
plunger for used biketubes @bullitt cargo bike to fix luggage. You need also m8 screws in the desired length. You can customize the Plunger by included scad file
Wire guide\protector for Larry vs Harry Bullitt I made this to hide the excess wire on my LvH Bullitt BBSHD conversion. I've run the cable along the top of the bottom tube and wanted to hide and protect the excess wiring. If you like this…
After i started to invest in gold i wanted a box to organize in my safe. I went for a wood box type construction with rabbet joints and corner shields. I printed all the body parts with a .3 layer height and .2 for the corners, latch and…
Simple mount for a frame/wheel lock to suit a Larry vs Harry Bullitt. May suit other bikes with similar seat stays. Print two copies, uses M4 screws and nuts and a few zip ties. There are internal channels for the zip ties, ensure…
Larry Vs Harry Bullitt Back Panel Bag Mount I made this so I could mount some molle bags I got from Aliexpress If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to…
My wife has crochet as a hobby. She constantly searches the internet and books for nice patterns, stitches and ideas. Today she was trying a so called ‘Bullion stitch’. Don't ask me, I'm not familiar with crochet.…
Backlight holder For the Bullitt bike
Der Halter passt perfekt an der Strebe vom Larry vs Harry Bullitt Lastenrad. Innen kann ein Gummi (20x10x1mm) zur Rutschhemmung installiert werden. The holder fits perfectly for the Larry vs Harry Bullitt cargobike. A rubber band…
Lock holder for a Abus Granit Extreme 59/180 HB310. It is designed to use it with a bullitt cargobike. Printed from TPU extrudr Flex Medium (A98). Secured with M5 screws and discs. I think it dont have to be TPU. I chose it for…
Larry vs Harry Bullitt - Stencil Scale as needed
A 100g Bitcoin spoof. Bitcoin ain't Physical, it is 100% digital. Don't fall for shiny rocks. Store your keys in thin air……the air between your ears. Oh wait…. there might be a super computer in there.
100HEX Larry vs Harry Bullitt https://tecnoloxia.org/100hex/o-proxecto-100hex/ 60mm side hexagon mosaic tile for the 100hex project https://www.thingiverse.com/thing:2477471 If you like this model, please throw me a like. Designing the…
Use the adapter to connect the phone holder with the Easy up of the Bullitt. Use the supplied screw and an M6 (locking) nut. You have to rise the handlebar clamp a few millimeters. When you secure the clamp you will automatically secure…
This is a replacement foot for the stand of the bullitt cargo bikes. It has 5 rocket wings all round so you can ride faster ;) Of course the feet wear out with use. That is why I have provided 12 mm material before the aluminium tube…
Larry vs Harry Bullitt Badge - Concept I was inspired by an old school QLD Rail Winged logo, so I made this. I think it would look good with the top few layers printed in a contrasting colour. I'll upload more photos as I print and mount…
I wanted to have my headlight mounted to the frame above the fork instead of on the fork for various reasons, but couldn't find any real solutions, so I made my own! The mount is attached to the two holes on the gussets between the head…
I painted the top Layer with a silver Prosca Pen - alternativ print it with 2 different colors.
After assembling my new Bullig boxes, I realized the screws protrude on the inside and was worried about them scratching the contents. I went looking for a solution and found thzinc's blog post and model on thingiverse . These are a…
Pied anti-fourmis pour les BULLISH SUPPORTS de P-Hive Je pars des BULLISH SUPPORTS de P-Hive : https://p-hive.com/fr/shop/bullish-supports-feet-2/ Ces pieds surélèvent la ruche et se ferment par un élément COVER, à tourillons, que le…
This model is designed as a mount for this Ego 56v battery adapter, to allow for mounting on the steer tube of a Bullitt cargo bike. https://makerworld.com/en/models/665368-ego-power-battery-adapter?from=search#profileId-592828
Remix of the original adding some curves softening and space for M4 screw with 10mm washer.
Je pars des BULLISH SUPPORTS de P-Hive : https://p-hive.com/fr/shop/bullish-supports-feet-2/ Le COVER fait partie intégrante de ces pieds. Je l'ai simplement revu en y ajoutant un chanfrein (tourillon), et j'ai trouvé intéressant d'y…
Tato úložná krabička je perfektním řešením pro bezpečné uložení vašich zlatých slitků. Uchovejte své zlaté slitky bezpečně a stylově v této prémiové magnetické úložné krabičce. Úložný prostor s víkem pro 12 zlatých slitků Testováno…
Volkswagen T6 Transporter BULLI Logo Badge – Front Door / Wing Emblem Designed for fitting to the front doors . This badge has been made as a close match to the original style , The design can be printed as either a one-piece or two-piece…
This model is designed as a mount for this Ego 56v battery adapter, to allow for mounting on the steer tube of a Bullitt cargo bike. https://makerworld.com/en/models/665368-ego-power-battery-adapter?from=search#profileId-592828
I painted the top Layer with a silver Prosca Pen - alternativ print it with 2 different colors.
How good is the model? Please have a look here ! (4.8 stars @ 8+ ratings) Summary This is a model of a VW T1 Bus “Samba” in a kit card style. After printing, the model can be assembled with the help of integrated connectors. The wheels…
I created a small “board stopper”, to mount a board (27mm), onto the sliding door. You will have to, buy a board and 4 ropes. 2 ropes will come together and will be secured with a hook. This hook, will be attached to the top of the door.…
