TD8680/TES11A Gaussmeter Shell Case With Kickstand
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Case with kickstand for a TD8680/TES11A Digital Teslameter/Gaussmeter
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 23
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
The main goal of this design was to add a kickstand to my TD8680 Digital Gaussmeter for easier viewing. Along with the printable parts, you'll also need:
- 4 M3 hex nuts (pressed into shell)
- 4 M3 x 5mm bolts
The main shell was printed in Polymaker TPU - might also work with non-flexible filament but I haven't tried it. There is a lip around the front that requires supports. Using organic supports needed a bit a cleanup but overall worked pretty well. If you don't want to deal with supports, you can just split the model in the slicer to get rid of the lip.
The kickstand needs to flex a little bit to snap into the socket, so I printed the socket and the kickstand in PETG.