Round case for Adafruit Feather, a button, and a NeoPixel strip
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A round case for an Adafruit Feather. It has a button on top, and a space for a NeoPixel strip around the edge.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 13
- Makes
- 0
- Views
- 73
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution
A 65mm x 20mm enclosure to fit an Adafruit Feather. It has a space to run a NeoPixel strip around the outside with a printed diffuser. The hexagonal button top fits a 6mmx6mm tactile button with a 3mm stem.
The hex button top is inserted into the top, then held in place by a snap-in plate which the tactile button attaches to (with a dab of glue).
The whole thing snaps together without further adhesive, but you need to align the diffuser and top with the bottom. The Feather mount requires 4 M2.5x6mm bolts.