Quick Release Fastener for Pet Indoor/Outdor Exercise Pen (Print-in-Place)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This print-in-place part holds a pet exercise pen fastened to a wall, with a quick-release feature for teardown/cleanup.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 11
- Makes
- 1
- Views
- 98
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Pets
- License
- Creative Commons — Attribution — Share Alike
Background:
I have a multi-panel exercise pen made from heavy wire that looks like this:

I wanted a way to secure this pen to a wall, while being quick and easy to remove the pen for cleaning or storage.
This model attaches to a wall using two screws, and has a rotating handle that secures the panels to a wall. To release the pen, just flip up the handle, and remove the panel!

Secured:

Released:

Recommended print settings:
- Material: PLA / PETG
- Layer Height: 0.2 mm or less
- Infill % : 50+
- Supports: Yes
- Print Orientation: Default as modeled
- Brim: Optional
Lower infill settings can be used, if a modifier is used for higher infill near the holes and the handle (this is included in the gcode & 3MF files):


Post print processing:
- Place the part in a vise, and grasp the rotating piece with a wrench.

2. Gently but firmly use the wrench to break the handle free so it can spin.

Work the handle back and forth a few times until it freely moves.
Installation Instructions:
- Install to the wall using screws.
- Open the handle, and place one of the panel wires into it.
- Close the handle.
- Removal is the reverse of install.