Quick Release Fastener for Pet Indoor/Outdor Exercise Pen (Print-in-Place)
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This print-in-place part holds a pet exercise pen fastened to a wall, with a quick-release feature for teardown/cleanup.
- Ocena
- 0 / 5
- Polubienia
- 3
- Pobrania
- 11
- Wydruki
- 1
- Wyświetlenia
- 98
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Pets
- Licencja
- Creative Commons — Attribution — Share Alike
Background:
I have a multi-panel exercise pen made from heavy wire that looks like this:
I wanted a way to secure this pen to a wall, while being quick and easy to remove the pen for cleaning or storage.
This model attaches to a wall using two screws, and has a rotating handle that secures the panels to a wall. To release the pen, just flip up the handle, and remove the panel!
Secured:
Released:
Recommended print settings:
- Material: PLA / PETG
- Layer Height: 0.2 mm or less
- Infill % : 50+
- Supports: Yes
- Print Orientation: Default as modeled
- Brim: Optional
Lower infill settings can be used, if a modifier is used for higher infill near the holes and the handle (this is included in the gcode & 3MF files):
Post print processing:
- Place the part in a vise, and grasp the rotating piece with a wrench.
2. Gently but firmly use the wrench to break the handle free so it can spin.
Work the handle back and forth a few times until it freely moves.
Installation Instructions:
- Install to the wall using screws.
- Open the handle, and place one of the panel wires into it.
- Close the handle.
- Removal is the reverse of install.