Better Bracket for Comet CTC-50M Coax Connector
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€5.76 – €7.04 net (excluding VAT)
For file: Comet CTC-50M v56_0.4n_0.15mm_PETG_MK4IS_4h57m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €6.40 excluding VAT (range midpoint).
- Weight reported by the author
- 118 g
- Print time reported by the author
- 4.96 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Better mounting bracket for Comet Antenna CTC-50M Bracket fits onto one end of a threaded 3/4" irrigation riser.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 10
- Makes
- 0
- Views
- 41
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Public Domain
Comet Antenna CTC-50M is flat ribbon coax cable for thru window opening connections to an exterior antenna
Better Mounting Bracket for Comet Antenna CTC-50M coax thru-wall connector fits onto one end of a threaded 3/4" gray irrigation riser. I use a 36" riser.
I drive a 2' long ½" diameter rebar about 12" into the ground outside a window. I slip the irrigation riser over the rebar protrusion. The bracket has a hole its underside. This hole is used to secure the bracket onto the upper end of the riser. The CTC-50M fits into a recess on the topside of the bracket and thereby provides support to the Comet coax connector. I zip the coax cable coming from the antenna to the irrigation riser below the bracket