clutch gripper mount
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
this is a clutch/gripper for holding or mount items, cameras, chemical stuff.
- Rating
- 0 / 5
- Likes
- 21
- Downloads
- 73
- Makes
- 0
- Views
- 682
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Chemistry & Biology
- License
- Creative Commons — Attribution — Noncommercial
this is a clutch/gripper for holding or mount items, cameras, chemical stuff.
originally intended as a 3D sketch for a version made of aluminum, it turned out that the printed version is also relatively strong and sufficient for my purposes.
of course there are limits.
Maybe it will help others too.
you might be interested in my other design of a laboratory clamp.
You need some kind of tube made of aluminum, steel or something similar, you can also try wood.
Drill a 4mm hole about 5mm before the end of the tube. This is where the gripping tongs are fixed with an M4 screw.
M3 screws and nuts to fix the claws.
I used M4 screws with hats to adjust the gripper. I added a screw hat. it might fit for you.
heat the screw up and press it in the cap.
I added a special version for petri dish. no guarantee ;)