1 / 1
Nissan Silvia S15 HVAC gear — image 1

Nissan Silvia S15 HVAC gear

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Replacement gear for HVAC control motor behind the radio. This is the gear that connects to the big gear with the lever.

Rating
0 / 5
Likes
6
Downloads
82
Makes
0
Views
300
Reviews
0

Updated at source:

Model information

Category
Automotive
License
Creative Commons — Attribution — Noncommercial — Share Alike

Usually one of the teeth break off over time. There are 4 gears in the unit. Check which one is broken for you. This gear is the one that drives the large gear with the lever arm. It has 13T on one end and 41T on the other end. The model worked good with my Polylite white PLA. Depending on your filament calibration and settings, the dimensions could be slightly off and the gears might slip or it could be too big. You could try adjusting scale slightly or try making your own in Fusion, adjusting the spur gear settings until you get the right gear engagement.

Settings I used to make the gear:

MOD .415
20 deg pressure angle
41 TOOTH
HOLE DIAMETER 3.8
0 backlash
4mm thickness
0 root fillet radius

mod .55
20 deg pressure angle
13 tooth
Hole Diameter 3.8
0 backlash
7.5mm thickness
0 root fillet radius

Tags