Snapmaker 2.0 Enclosure Filament Holder Adapter
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€4.31 – €5.26 net (excluding VAT)
For file: 01PSpulholder_1742420643564.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €4.78 excluding VAT (range midpoint).
- Weight reported by the author
- 37 g
- Print time reported by the author
- 6 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Relocates Snapmaker 2.0 filament holder to the rear, improving access. Requires M4 screws/nuts and original holder. PETG
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 16
- Makes
- 0
- Views
- 197
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Snapmaker 2.0 Enclosure Filament Holder Adapter
Function:
This adapter relocates the filament spool holder on the Snapmaker 2.0 enclosure from the long side to the narrow rear side, addressing space constraints and accessibility issues. It allows for convenient filament access when the enclosure's long side is positioned against a wall. Note: Since the narrow side does not have a pre-existing hole for the filament, you will need to create one. For example, using my model: https://www.printables.com/model/1194810-3d-printer-enclosure-feedthrough-for-pc4-ptfe-tube
Components:
Filament Holder Adapter
Technical Specifications and Printing Parameters:
Material: PETG
Printer: Snapmaker 2.0 A350
Print Speed: 40 mm/s
Nozzle Diameter: 0.4 mm
Layer Height: 0.16 mm
Infill Density: 40%
Supports: Recommended for angles greater than 80°; support removal from threaded holes is critical.
Assembly Instructions:
Print the adapter with one of its narrow sides down.
Insert the original Snapmaker spool holder into the adapter's recess.
Secure the holder with an M4x12mm screw and M4 nut.
Slide the assembled adapter into the enclosure's profile slot.
Position the adapter and secure it with two M4x10mm screws.
Use a hex key for screw fastening.
Additional Materials:
M4x12mm screw
2x M4x10mm screws
M4 nut
Hex key
Original Snapmaker filament spool holder included with the "Snapmaker 2.0 Dual Extrusion 3D Printing Module"!
Key Features:
Relocates filament holder for improved accessibility.
Compatible with single and dual spool configurations.
Secure profile slot mounting with integrated threaded holes.
Optional holes for future expansions.
Applications:
Optimizing Snapmaker 2.0 enclosure setup in confined spaces.
Enhancing filament accessibility.
Customizing enclosure configuration.