1 / 4
Dragonburner Sherpa Toolheadsensor
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Filament sensor for sherpa patterned extruders, using a 6x3mm magnet
- Rating
- 0 / 5
- Likes
- 38
- Downloads
- 69
- Makes
- 0
- Views
- 505
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Voron Parts & Upgrades
- License
- GNU General Public License v3.0
This is a little spacer, only 8.6mm thick that has regular sherpa extruder mounting pattern.
it is used as sensor between a toolheadcutter and extruder to see if the cut has been successfull. This design is fully exclosed and uses a 6x3mm magnet, d2f L switch and JST-XH 3 pin socket.
BOM:
- 6x3mm Magnet
- d2f-L switch (the lever cant be longer than the switch body)
- JST XH Socket
- some wires
- superglue
Assembly:
- Insert the magnet into the socket
- solder 2 or 3 wires to the switch pointing away from the switch, route it as close to the swithc body as possible
- insert the switch with the loose lever side first into the printed body
- secure switch witch some filament strands through the provided holes
- route the cable through printed part
- solder the cables to the JST socket
- glue the socket into the last opening
- done
Install with the text facing the front part of your extruder
Have fun!