1 / 3
ABUS FEUERSTOPP Wall Mount
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Attribution — Share Alike
About
This is a two-part wall mount for the ABUS FEUERSTOPP fire extinguising spray. The spray clips into the mount and can be easily removed in case of a fire.
Additional Parts
For wall-mounting, appropriate screws are required. The wall mounts have 5.5mm through-holes and a 13x6.4mm counterbore (fitting for M5 cylinder screws with washers).
Mounting
Recommended Printing Parameters
| Orientation | Print in the provided orientation of the STL file. |
|---|---|
| Support Material | Print without support material. |
| Layer Height | 0.2 mm |
| Nozzle Diameter | 0.4 mm |
| Perimeters | 4-6 |
| Material | PETG |