Counting matching models…
On my bike I have two different keys to use that look almost the same. To differ the keys from each other I created an enclosing key cap. In pictures you'll see a labeled the cap but the files are not labeled. Theres also a STEP model so…
Suzuki Hayabusa keychain, with a simple and easy design for a quick impression and low material cost.
Octagonal Restrictor Gate for Hori Hayabusa joystick (used in the Hori RAP4 for example) designed as a drop-in replacement for the stock square gate. Important: I modelled the pins of the original gate but actually didn't print them to…
Abus Bordo Lock holder for Abus folding lock to mount to bicycle frame via standard water bottle cage mounts. I've printed this since I use the one lock for two separate bikes. It is a snug fit - I'm on V4 and happy with this level of…
Hi Anthony, Just doing the shoulders now so should have them loaded up later today. Do check the sizing suits your needs and let me no what you think, Cheers Jace
If you enjoy this bracket, please consider making a donation to familybikeride.org. I made this bracket to help families get on an affordable bike that can conveniently haul their family. Please donate what you feel is fair to our group:…
Brabus G900 Rocket Edition
Since the movable part of the mount coming with the Abus Bordo 6000K/120 SH tended to fall off rather often, I decided to construct a 3d-printable replacement, while I still was able to take measures on the original. I found printing it…
Abus chain locks are very tough. Unfortunately my chain did not came with any kind of a holder or mount. It was tedious to tangle it around the frame. So here it is: you can easily place chain and secure it inside a holder. Update v2 : I…
i printed it in pla (pet-g could be better or even nylon) using 100% infill and 4 perimeters (could be overkill but the difference in printing time was minimal since it's only 2mm thin) i left 4 holes instead of modeling the pins that…
Dieser kleine Marker hilft die Schlüssel zu unterscheiden, wenn ihr z.B. für euer Fahrradschloss und den E-Bike Akku sehr ähnliche Schlüssel habt.…
Update 17.07.2025: New Version added. Better printing gcode. Fits better. Original is broken. New Verion: Stronger and more aerodynamic. At least 4 layers above, below and walls. At least 25% infill. I put felt tape on the inside of the…
I Printed that thing with Ninjaflex TPU first, works fine but is a little too soft. I then tried it with some other cheap TPU which is a little more stiff and worked perfectly. Does need support. It may be possible to print it with PLA or…
Key cap for Abus keys. Designed in openscad, source attached too. Printed standing, no supports, just a few brims. Simply slide them on, and put the key back on the keyring.
I've requested an Abus adaptor to Nuki but my new cylinder doesn't have the shape of that adaptor but an 9.9mm cylinder instead so I had to create this adaptor for it.
ABS/ASA 100% Infill Print in standing up position
Adapters to use the Nuki Ultra Lock with common knob cylinders. You need to update the height of the base plate to match your cylinder. See Git Repository for more information: https://github.com/philipparndt/nuki-ultra-adapter I have the…
I needed a light and quick to apply lock for my new Ninebot Max G2 eScooter. The Abus Sportflex 2504 was my choice. It’s small, light weight with a 90cm retractable cable quite long, keyless with a 4 digit code lock and mounts into the…
Hello everyone, This is a simple model of neck-mounted ABUS Granit 540 U-lock holder for Ninebot Max G30 e-scooter. Hardware required: 6x M5x12 mm bolts 6x M5 nuts Double up to eliminate lock rattle/movement (see photos). Recommended…
I bought the wrong lock mount for smaller u-locks and thought before sending back an open pack that will be thrown away by rain forest company - why not print 2-3 bits and get a mount out of it. I've added the openscad files so you can…
You need two of the parts “Schlosshalter_vorne-Teil1” and “Schlosshalter_vorne-Teil2” and one of “Schlosshalter_hinten_links_Teil” and “Schlosshalter_hinten_links_Teil2” for mounting the U-Lock at the left side of your carrier. For the…
Siebeneckige Dose, 9-teilig im Matroschka/Babuschka Design Gedruckt mit PLA ………………. Seven-sided tin, 9 pieces in Matryoshka/Babushka design. Printed with PLA
Drop tanks for the Ki-43 (late I/early II version) and a pdf file with airbrush masks for the insignia (the hinomaru and the tail arrow) and the wheel well. Everything is 1/72, intended for the FineMolds kit.
Printed mine in ASA with 5 Walls
I designed this holder for my Abus Bordo 6000K after the original mount failed on rough trails, especially when mounted on the top tube. Since using this one, I haven’t had a single issue with the lock coming loose. The mount fits the…
A shackle lock holder for Abus Granit XPlus 540 that mounts on the bottle mounts. 63mm between bottle mounts +/- 5mm. Fit is tight and avoids too much wiggling. Had great results printing: vertically supports only on the inside part using…
Use the provided GCODE or open the keyhull_prusaslicer_project.3mf file in Prusaslicer.
Note by the way! The ABUS U-lock Granit XPlus 540 30cm does not fit through the rims of the Ninebot G30D due to the rectangular shape of the bracket and is only suitable for connecting the Ninebot frame (45 ° spar) to a traffic sign or…
This is designed to work with the ABUS Granit X-Plus 54 Mini U-lock, and be mounted on the Boosted Rev electric scooter, which has a 38mm diameter tube. It may work with other similar sized locks, but I have not tested it with any other…
Adapterstück + Blende. Hinweis zum Ausdruck: Mit 0,15mm Schichthöhe gedruckt. Und Anzahl Perimeter erhöhen bis alles gefüllt wird. Material: PC-CF oder PETG-CF empfehle ich. Im Slicer hohe auflösung bzw. nur geringe Längen- und…
I needed a spacer to mount my ABUS Granit 540 bicycle lock with the ABUS USH 540 bracket. The original spacers are for round frames with a diameter of 15 - 35 mm and I needed one for diameter of 10 mm, so I decided to design my own…
Abus U-Lock holder for bicycle luggage rack. Fits for Abus 540 Granit and maybe others. Diameter of the luggage rack tube 8-16 mm.
Another quick model from Turn of Wheel's Fortune - this time of a Dabus which is a medium celestial. For this model I did some cleanup, posed back the hair (it was much more massive before) and I sculpted the horns and facial features on…
I designed a simple chin mount for my Mountainbike helmet - the abus youdrop ff.
This is a mount for an ABUS Combiflex 65 lock. The mount will fit on 33,5 mm tubes. In my case I use it for a Hudora BigWheel scooter. It's the first model I created and I included the FreeCAD files in case you want to optimize something…
Got new lock and keys. For daily use I wanted to have a semi fixed doorknob to open and close the doors from the inside without looking for the keys everytime. But I wanted them also to be removable for holidays and other occasions. So I…
A holder for the ABUS Bordo 6000/90 to mount it longitudinal in the back of my fully. Printed with TPU.
After many years of jackhammering concrete in the pool business, riding my sport bike quickly became painful due to the vibrations from the bike causing my hands to go numb. This custom made grip, printed in TPU, both reduces vibration by…
I use this wall mount in a camper van as a handy storage for the Abus Diskus 24/50 lock. I strongly recommend to use PETG instead of PLA. During last summer we had high temperatures in our van and the PLA could not withstand these. The…
these are easter bunny version of babushka dolls i'd reccomend printing per object i hope it prints well without to many color switches ( still working on it ) =)
Ersatzcover passt perfekt. Die Außenkante auf dem Foto ist nur wegen Warping etwas rundlich. Gefiel der Frau aber besser ;-)
A quick and (very) dirty remix of the original model. Just added some negative boxes in prusa slicers, made the knob larger and filled the holes. Best to look at the image to see if your key fits. Abus key. German keyword:…
Děti dokážou otevřít téměř vše. Dětská pojistka ABUS JC1200A JONAS je sice dobrá, ale má jeden malý nedostatek. S tímto vylepšením můžete tento nedostatek odstranit a uzamknout místa která chcete ochránit před dětmi. Používání tohoto…
ABUS Bicycle lock holder that mounts to standard drinking bottle fixings. Perfect for a commuter, no need to stuff lock to backpack which is heavy already. This first edition fits only ABUS Granit 640 lock, fitment has to be somewhat…
This mount holds an ABUS Bord uGrip 5700 folding lock on the top of a Thule pack 'n pedal rack. Print instructions Category: Sport & Outdoors Summary This mount holds an ABUS Bord uGrip 5700 folding lock on the top of a Thule pack 'n…
This is a snap fit case for the Hydrabus [ https://hydrabus.com/?v=7516fd43adaa ] It has side cutouts for the buttons and microSD slot and lightpipes for the USB and PWR leds, with the idea that you print the top with translucent or a…
The Abus EaZy KF only supports tube diameters up to 36 mm. For tube diameters greater than that, open up the Abus EaZy KF.FCStd file with FreeCAD, input your tubeDiameter, and presto! print out the top and bottom parts. Unscrew the holder…
Sun-visor for the ABUS cycle helmet Urban-1 .0 3.0 Made for size 51-55 cm, I have no idea if it fits other sizes. So I made a test print to test this. Print upside up. Use supports from the print bed. The support is a bit difficult to…
Mit dieser Lösung möchte ich speziell für den epf-pulse ein Adapter anbieten der dafür sorgt dass man die Schlosshalterung ohne Probleme an den zu großen Rahmen der nicht rund ist anzuschließen Mit der Lösung wird aus aus der runden…
The existing backlight of bike helmet “Abus Urban-I 3.0” eats CR2032 batteries like cereals at breakfast. So I designed a ne adapter for my “ Büchel Micro Lens ST ” which can be recharged by USB. Supports just needed for the top slide.
Beautiful Lightbox Mercedes and Brabus/Carlsson/AMG Use Led Cold White for beautiful light
What: An almost complete remake of the Filamentalist, designed to to fit in a limited space. Reuses the Idler spool from the filamentalist. Will work with the Rim roller from the F1 mod, I design new ones using a 8mm tube with a M6 bolt…
Printed on 0.4 nozzle, prusament petg 0.2 structure profile.
Scale it by 1.05 in the x-direction (max. lenght/width), otherweise no unlocking possible! Massive infill and 0.2 mm layer heigt works fine. PETg is currently in real durabilty test. Original parts seam to be PA.
Just a holder to make holding an Abus 55/40 a bit less cramp-inducing while practicing lock-picking with one. Stays in via friction-fit, but easy to remove as well. Has a stop to catch the chamfer on the lock to keep the lock from going…
10 june 2026: revision 3 with a better fit. Sun-visor for the ABUS cycle helmet Urban-1 4.0 Made for size 57-61 cm, I have no idea if it fits other sizes. So I made a test print to test this as shown in the last 4 pictures. Print upside…
My shield wheel was suddenly gone one day. Created a new one in Fusion360
BoatSilhouette
A replacement cover set for the ABUS tresor 1385 combination bicycle lock. To assemble glue both sides together with a glue that has a little bit of volume (I don't reccomend superglue), so that the tolerances are filled. If you still…
It helped me with my old fuse sistem, to keep them organised, So you might need it, you never know :D
Made this very simple lock holder for my ABUS 6300/90 Bordo. I upladed the step file as well so you can adjust it to your needs. i attached it with VHB tape but i added screw holes if you need those. Feel free to comment.
Lock holder for a Abus Granit Extreme 59/180 HB310. It is designed to use it with a bullitt cargobike. Printed from TPU extrudr Flex Medium (A98). Secured with M5 screws and discs. I think it dont have to be TPU. I chose it for…
About This is a two-part wall mount for the ABUS FEUERSTOPP fire extinguising spray. The spray clips into the mount and can be easily removed in case of a fire. Additional Parts For wall-mounting, appropriate screws are required. The wall…
Fixing Clip for Abus Lock (ø 14mm) to baggage carrier (ø 10 mm) Directions: Print 2-4 pieces with 100 % infill Material: PETG Clip für Abus-Bügelschloss (ø 14mm) an Gepäckträger Benötigt werden 2-4 Stück Material: PETG, Infill: 100%
Tested with PLA, decided to print mine from TPE for better durability during crashes (it's for kids). Mounted to the bike frame with zip ties. No supports needed. Bunch of frame diameters included, if you need specific size, let me know.
This is the fourth iteration of this design. the hook seam to be strong enough, i have one who is in place since one year. I get better result using PETG, ABS works to. Print with layer height of 0.25 and 5 perimeters, without any…
Infill: Min. 10% No Supports needed English: This is a holder for the HomeTec Pro remote control from Abus. Switchbots are inserted into the holder so that the remote control can be operated via the smartphone/smarthome. Finally, the…
Cap to prevent accidental pressing of the lock. Category: Household
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
printed on my prusa mini + . Only advice is to print in petg, because of the heat inside the car… No suporte needed extra parts: 3x2 interna hex 1 zip tie
Do you have a S1000R (2021 and up)? Great bike! problem is, thieves think the same! so now you have to cary a brake lock or a chain with you to lock your bike. Unfortunately the S1000R doesn't have much space to stow a lock on/in. If…
cycling daily as a hobby and of course safely with a helmet on. Standard visor with a gray tint. Still, you have direct sunlight in your eyes, and that's why I developed this visor. Printed in PC Prusa Blend without support. Step file…
This is a custom adapter for some kind of ABUS Securelocks for the Switchbotlock
Hey team, The standard outer jacket for my ABUS 83MAR/45 Mariner Series was starting to look a bit sad around the edges to I decided to give printing a new one a try. This outer plastic jacket adds a bit of protection to whatever your…
Ryu Hayabusa from Ninja Gaiden franchise for you to remember that 80 & 90's vibes
Practical bicycle lock holder for the ABUS Numero 5510C/180 SCLL cable lock. Also suitable for other bicycle locks with coiled cables and a cable diameter of 10 mm to 15 mm. The lock slides easily into place. Suitable for 35 mm seat…
I printed mine in PETG, 0.40 mm nozzle, 5 vertical walls and 100% infill. It locks the lock in place, I'll probably work on a don't-need-to-unlock-the-lock-to-remove-it mount in the future.
The Abus 402 comes with a mount that's at right angles to what I need, so I designed a mount that's better suited. The source is openscad so if your seat stem is a different diameter, or if you want the mount to be a different position in…
Distanzstück für Treppensicherung von ABUS(R). Einfach und Schnell mit Kabelbindern (4,8mm) an VA-Pfosten mit 42,4mm Durchmesser montieren.
This 3D-printable faceplate replaces the original ABUS SRG92 escutcheon when the lock cylinder is flush with the door. It is designed for use with the Nuki Smart Lock Pro 5, ensuring a clean installation without gaps. PLA print. Diese…
This is a slide on cover to conceal (with a colour of your choice or paint) an ABUS Door Closer TS40 door closer. I wanted a door closer that I could disable with ease but I also wanted it to be easy on the eye. I have included an…
The Litelok X3 comes with terrible mounting options, the stock bracket is enormous and doesn't fit my bike. However, I have an Abus Granite D-Lock which uses the Abus Eazy KF mount system, which is great. So I designed this friction-fit…
Der originale Deckel ist bei Renovierungsarbeiten verloren gegangen. Also musste ein neuer Deckel her. Bild: Nachbau, noch ohne Finish Bild: Original Print Settings Printer: i3 Prusa Acryl Rafts: Doesn't Matter Supports: No Resolution:…
This is a simple print for moubnting one model of Abus ulock. I printed one part in TPU for the sliding, and the other in pla, with maximum of walls for the rigidity. You may want to remove the top part of the key hole if your key is'nt…
The mounts supplied with bike lights or cameras, e.g. from Lezyne, are too large and not very elegant for attaching them to a helmet. I therefore designed a small, sturdy mount for the ABUS Viantor. It clamps securely between the helmet's…
I hope you find this useful! ;) I couldn't find a suitable mount for my road bike. The biggest challenge is mounting a heavy lock on a carbon frame, which can cause cracks or structural damage. Using seat post or seat stay mounts on…
The Tubus Locc is a bicycle luggage rack which contains a lock bracket for Abus Granit locks. Spare parts for the bracket are not available at Tubus or Abus. So we made one ourselves. You can use the original screws. If you have the long…
To prevent my bike lock holder from self-opening when driving on rough terrain, I designed this clip that keeps it securely closed. It snaps on easily with a nice click and holds on securely, while still being easy to remove. Lock: ABUS…
Saint agabus statue for devotional display, saint agabus statue, 3d printable saint agabus sculpture, religious statue suitable for display. This devotional statue is ideal for display on a table, shelf, or diorama, and serves as a…
I wanted a way to carry my lock on my bike, without buying the clunky Abus branded mount. This solution uses only one strap, making it easy to attach/detach from the bike, and can live on the lock itself permanently without adding too…
Lighting upgrade for ABUS Bordo 6000C Unfortunately, I only noticed after purchasing the lock that the ABUS Bordo was also available with LED lighting, which is very useful when unlocking the lock in the dark 😉 But what's the point of…
Der Adapter sorgt dafür, dass die Schlosshalterung nicht nach unten wandert. Für die Verschraubung benötigt man zwei M5
Most of my files are FREE, thanks to the amazing support from my Patreon community! 💖 By joining, you help keep my work accessible to everyone while unlocking: ✨ Early access to new models (before public release!) ✨ Exclusive Request…
This model brings printed adapters that allow you to attach a magnetic visor to hopefully any bike helmet that does not come with a visor option. The background of the story is that for my head size (larger than 63 cm), there are only…
Ich habe an meiner Gartentür ein Abus Zusatzschloss als Sicherung montiert. Der Abstand vom Schloss zur Wandverankerung ist sehr groß und die Tür hat etwas Spiel. Dieser Einsatz verhakt sich in der Wandverankerung und bleibt stabil im…
Made to fit my Tiger900. Used for a while now, it has survived several km on varied roads and a rough gravel weekend.. Hardware needed for mounting. 2 5x20mm screws 2 5mm locknut 2 5mm washer And whatever you get from the ABUS holder box.…
Die ABUS-Schlüssel für Fahrräder und Fahrradschlösser sind schwer auseinanderzuhalten. Um unsere Schlüssel auf den ersten Blick zu erkennen, habe ich diese kleinen Schlüsselmarkierungen gemacht. Das Druckergebnis ist sehr abhängig vom…
