Ikea Fniss -> Hydroponic Tower
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This design enables you to use ikea fniss trashcan as water reservoir for your hydroponic tower
- Rating
- 4 / 5
- Likes
- 31
- Downloads
- 133
- Makes
- 1
- Views
- 1,765
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
This model enables you to use your ikea fniss trashcan as a water reservoir for your hydroponic tower.
The Ikea Fniss trashcan is quiet cheap (2.50€ in Germany) so its a good option especially for smaller towers.
I designed a normal lid and one with a hole for cable and refill. There is a plug to close the hole too.
This design uses the Module_Adapter_Custom.stl from the original design as connector to screw your tower on.
I just glued everything together. The 4 quarters can be screwed together using m3 screws.
Adjust to your needs. I provide the onshape project: Link
Guide
- 3 of “Fniss Lid quarter part” - from this printable page
- 1 of “Fniss Lid quarter Part with hole” - from this printable page
- 1 "Fniss Lid hole plug" - from this printable page
- 1 “Module_Adapter_Custom.stl” - from the other printable page
Asseble
- einter (or both) glue and screw all 4 lid plates together
- after it dried, glue the “Module_Adapter_Custom” to your lid. This makes the whole connection even stronger
- Just snap the whole thing onto your fliss trashcan
Leave a comment for feedback, a make and like :)
Have fun