Truthear Hexa - Case + Lid
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Simple Case for Truthear - Hexa IEM (OEM CABLE)
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 115
- Makes
- 1
- Views
- 576
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Audio
- License
- Creative Commons — Attribution — Noncommercial
Simple Case for the Hexa IEM, made using the original cable, but should be the same for every othe cable that has the over ear hook.
This design is made for the stock cable, so any cable which may be longer or thicker may not fit, if you use a different cable check the remixes!
It has a small 3,5mm hole for the jack, the best way to roll the cable around I founded is:
first lock the IEM into their base, then insert the jack, then roll around the 2 sides of the cable, this way you have less revolution around the center and less strain on the cable itself.
The Lid is quite a precise fit, this is because there isn't any locking mechanism, is just friction locked,
PS. it will be quite locked at first, but it gets quite good after a couple times.
if your printer isn't precise please scale (x, y) accordingly, literally 0,5mm more should be fine, it is just locking in place rn, but i'll try to make a small lip on the lower side to try to lock it and make it more loose on tolerances.
Enjoy!