Hygrometer support for Dyna Dry Box / Filament Box 4L base
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A hygrometer support for the Dyna Dry Box / Filament Box 4L.
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 57
- Makes
- 0
- Views
- 412
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Public Domain
I love the Dyna Dry Box / Filament Box 4L made by Dynarun.
I wanted to add a hygrometer inside the box and found that the square socket from Dynarun's design would fit perfectly.
Snaps in perfectly and you can optionally glue it to the base for more stability.
I printed mine in PLA, 0,2 resolution. A little bit of supports needed. I already marked them in the Slicer file, so make sure you select “for support enforcers only”!
The hygrometer model I used is this. It requires particular channels for fitting into the support. If you have a different layout for the channels, let me know and I will upload the parametric file so you can adjust the position.