1 / 5
DePersia Bailer Cap for Sunfish sailing dinghies — image 1
1 / 5

DePersia Bailer Cap for Sunfish sailing dinghies

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

This is a replacement for the original DePersia bailer cap found on older Sunfish sailing dinghies.

Rating
0 / 5
Likes
4
Downloads
58
Makes
1
Views
310
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Share Alike

The older Sunfish sailing dingies had the DePersia bailer to empty the footwell after a capsize or waves spilling over the deck. This metal plug often goes missing (like a left sock), and the company closed down long ago, so “new” replacements are unavailable. They can only be found on another older boat that has reached the end of its life.

I have been looking for this for a while but, strangely, have not found a model, so I fired up my CAD software. Fortunately, I have a bailer cap and some limited modeling skills. 

I have included 2 additional bailer caps with 0.2mm and 0.4mm clearance, respectively, with 0.2mm clearance providing the best fit for me. The clearance is imprinted on the bottom edge to help identify caps with different dimensions for fitting.

I have added an SAE 568-114 o-ring to mine for a good seal, and it is easier to undo when not locked on a hard shoulder. Some pictures show a multi-material print with a TPU shoulder.

I have printed this with a 0.6mm nozzle and 0.2 layer height in PETG.

Edit 2025-04-06:

The cap is designed to be printable in 2 orientations:

  • The flat bailer cap is printed on the top flat surface (upside down) and needs no supports.
  • The domed cap is printed standing on the threads and would need support for the ‘shoulder’ around the threads. 

The bottom of the cap has been improved to provide a seat for the 5/8 ball in the DePersia bailer, which prevents water ingress when not moving or moving slowly.

Tags