1 / 3
MZ76 v2 extruder (MK3S/MK2.5S) with fan heat set inserts — image 1
1 / 3

MZ76 v2 extruder (MK3S/MK2.5S) with fan heat set inserts

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Updated screw holes for extruder fan to take heat-set inserts. Updated exiting heat insert holes for stronger inserts.

Rating
5 / 5
Likes
14
Downloads
99
Makes
2
Views
1,185
Reviews
1

Updated at source:

Model information

License
GNU General Public License v2.0

I'm a big fan of MarcoZ76's FDM-printable redesign of the Bondtech upgrade for the Prusa MK3s. After taking apart my extruder for maintenance a few times, though, I noticed the screw holes for the extruder fan were getting loose. My fan wasn't fitting as snuggly and was beginning to rattle a bit. I know some people go to great lengths to avoid having to use heat-set inserts, but I think they're a pretty easy way to ensure things stay fastened well over time and through multiple rounds of reassembly. I updated each of the screw holes for the extruder fan, as well as all of the existing holes for Bondtech heat-set inserts, to accommodate J&J Products M3 threaded inserts (5.7mm length). I haven't ever had issues with the Bondtech inserts, but these ones from J&J are thicker and I've had really good luck with them in other applications. The holes for the inserts have a 4.2mm diameter at the surface and an 8° taper to accommodate the tapered shape of the inserts and to help with inserting them straight.

I recommend using the right tool for the job when inserting these threaded inserts. A standard soldering-iron tip will work, but using an actual heat-set insert tip will help with straight and flush installation.

I printed mine using ASA and PrusaSlicer's built-in Prusament ASA profile. For infill, layer height, and supports, please use the print settings MarcoZ76 recommends for his original design (30%, 2mm, with supports).

Big thanks to MarcoZ76 for his extruder, and to Bondtech for sharing the original design under a GPL license. Aside from the heat-set inserts, I'm using genuine Bondtech parts and recommend people do the same.

Tags