ESP32-S2 Feather TFT STEMMA Case
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
3D print a Stemma case for the Adafruit TFT Feather with ESP32-S2
- Rating
- 5 / 5
- Likes
- 53
- Downloads
- 160
- Makes
- 2
- Views
- 2,467
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Portable Devices
- License
- Creative Commons — Attribution — Share Alike
Video:
Guide: https://learn.adafruit.com/feather-tft-stemma-case
3D print a Stemma case for the Adafruit TFT Feather with ESP32-S2.
TFT Feather ESP32-S2
https://www.adafruit.com/product/5300
BMP280 Stemma QT
https://www.adafruit.com/product/2651
Stemma QT Cables
https://www.adafruit.com/product/4210
This dev board features a 1.14 inch display with a Lipo battery charging circuit and battery monitor.
It's has the ESP32-S2 mini module which works with both Arduino or CircuitPython.
We designed and 3D Printed a snap fit case to make a little compact IoT project.
You can easily add STEMMA QT breakouts like temperature and humidity sensors.
The two buttons on the front are accessible so you can quickly reboot or get into the bootloader.
The STEMMA QT connector is also accessible, so you can daisy chain your sensors and make a portable IoT project.
You can 3D print the parts without any support material using your favorite filament.